Abstract:Water as an auxiliary solvent is added to various alcohol solvents (methanol, ethanol, and isopropanol) and N,N-dimethylformamide (DMF) to form a variety of liquid mixtures, which are divided into different types according to different proportions. Starting from pure water, 0.1 mass fraction of organic solvents is added at a time until the ratio of organic solvent is 1. The abovementioned liquid mixtures are used as solvents to dissolve halosulfuron-methyl at 278.15–323.15 K under 101.2 kPa by means of the isothermal static technique. The experimental solubility of halosulfuron-methyl was calculated and validated by using three various computational models, i.e., Jouyban–Acree model, modified Apelblat–Jouyban–Acree model, and van't Hoff–Jouyban–Acree model. Considering that there are many factors that change the experimental results, this experiment mainly selected temperature and water content as two factors as the main independent variables. From the point of view of temperature, it changes from a low value to a high value, so it is obvious that the solute mole fraction also follows its footsteps. Unlike the temperature, as the organic solvent is continuously diluted by water, the solute solubility changes in the opposite direction to the water content. By controlling the variable method to ensure that the above two variables remain unchanged, DMF has the best dispersion ability for all the selected solvents to dissolve halosulfuron-methyl. The solubility maximum of 2.542 × 10–3 at 323.15 K was found in pure DMF, and four systems followed the descending order as (DMF + water) > (ethanol + water) > (methanol + water) > (isopropanol + water). The largest relative average deviation and root-mean-square deviation values were 5.70 × 10–3 and 6.90 × 10–6, respectively. For drugs with poor water solubility and dissolution rate, measuring their solubility and understanding their dissolution properties could effectively help solve the problem of nonwetting and nondiffusion. The obtained equilibrium solubility and correlation parameters of halosulfuron-methyl in studied cosolvency systems could be favorable for the industrial production, recrystallization, and purification processes of API halosulfuron-methyl.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jced.0c00633?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jced.0c00633</a>.Chemical structure of halosulfuron-methyl (Figure S1), experimental apparatus (Figure S2), and XRD patterns (Figure S3) (<a class="ref internalNav" href="#silist">PDF</a>)This article has not yet been cited by other publications.

Binary Solid–Liquid Solubility Determination and Model Correlation of Quizalofop-p-ethyl in Different Pure Solvents

Determination and Correlation of Solubility of Quizalofop- p -ethyl in Seven Pure Solvents and Three Binary Solvents

Role of solvent properties and composition on the solid-liquid equilibrium of trifloxystrobin and thermodynamic analysis

Measurement and Correlation for Solubility of (S)-(+)-2,2-dimethyl-cyclopropane Carbox Amide in Different Solvents

Solid–Liquid Equilibrium of 5-Chloro-8-hydroxyquinoline and 5,7-Dichloro-8-hydroxyquinoline in Different Solvents and Mixing Properties of Solutions

Measurement and correlation of solubility data for albendazole in ten pure solvents and two binary solvent systems from 278.15 K to 323.15 K

Equilibrium Solubility Investigation and Thermodynamic Computational Modeling of Halosulfuron-methyl in a Series of Cosolvent Mixtures at a Temperature Range of 278.15–323.15 K

Solid-liquid equilibrium of forchlorfenuron in four binary solvents: Experiments, hansen solubility parameter and molecular simulation

Solubility, modelling, preferential solvation and solvent effect of 2-amino-6-chloropyrazine in ten pure mono-solvents and four solvent mixtures at 278.15 K to 323.15 K

Solid–Liquid Equilibrium and Solubility Determination and Correlation of Dyclonine Hydrochloride in Eight Pure Solvents and Four Binary Mixed Solvents at T = 278.15–323.15 K

Solubility Determination and Correlation of 4-(Bromomethyl)-2(1H)-quinolinone in Different Pure Solvents Over the Temperature Range from 273.15 to 313.15 K

Solubility measurement, modeling and Hansen solubility parameters of 8-Chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo[b,e][1,4]diazepine in four binary solvents

Measurement and Thermodynamic Modeling of Oxaprozin Solubility in Polymers and Mixed Solutions

Multicomponent Solid–Liquid Equilibrium of 1,3,5-Triformylbenzene—A Key Intermediate for Porous Organic Cages: Solubility Determination and Correlation in Different Solvent Systems

Solid-liquid equilibrium of 1-[4-(4-hydroxyphenyl)piperazin-1-yl]ethenone in twelve mono-solvents: Solubility determination, Hansen solubility parameter and thermodynamic analysis

Measurement and Correlation of trans -4-Hydroxy- l -proline Solubility in Sixteen Individual Solvents and a Water + Acetonitrile Binary Solvent System

Solubility Measurement, Modeling, and Dissolution Thermodynamics of Propylparaben in 12 Pure Solvents

Solubility Measurement and Model Calculation of Fluorene in Six Binary Solvents from 288.15 to 328.15 K

Measurement and correlation of solubility of 2-alkylanthraquinone (ethyl, tert-butyl and tert-amyl) in mixed solvents of 1,3,5-trimethylbenzene and tetrabutylurea

Equilibrium Solubility Determination and Correlation of Monobenzone in Fifteen Monosolvents at a Series of Temperatures

Measurement and Thermodynamic Models for Ternary Liquid–Liquid Equilibrium Systems {Water + Polyoxymethylene Dimethyl Ethers +4-Methyl-2-pentanol} at Different Temperatures