Abstract:The existing detection devices for moldy core in apples have critical shortcomings like high detection costs, high energy consumption, complicated analysis processing and redundant spectral information in wide waveband, for the light sources in most of them are composed of high-power and wide-band illuminant(like tungsten-halogen bulbs), and data acquisition and processing of them rely on the spectrometer and the computer. In this paper, a portable and low cost nondestructive detection device for moldy core in apples was designed based on the conclusion that the apple diameters and the intensities of some characteristic transmission spectra were the most important affecting factors of nondestructive detection for moldy core. In order to determine the specific band related to moldy core in apple, a test platform was built to obtain the transmission spectrum data by using tungsten-halogen bulbs, spectrometer and computer. A waveband of 690-730 nm was confirmed as the characteristic spectrum band through correlation analysis from a band range of 200-1025 nm. According to this band, a series of narrow band LEDs(light emitting diode) were adopted and used to make a special light source. Then, an information collection device was designed to obtain apple diameters and intensities of characteristic transmission spectra. The device consisted of a core processing unit, a driver circuit of LEDs, a conversion and detection circuit of photoelectricity and a measure module of apple diameter. Microprogrammed control unit(MCU) MSP430 was used as the core processing unit to call other function modules and process data. Pulse width modulation(PWM) chip PT4115 was used as a driver to control let-through currents of LEDs. The linear guide and limit sensor were combined to measure apple diameters online. To get an intelligent detection model for sorting out moldy core apple based on apple diameter and intensities of characteristic transmission spectra obtained by above information collection device, 120 Fuji apples produced in Qianxian, Shaanxi were selected, which were always put in a refrigeration storage at a steady temperature of 4 ℃. These apples were taken out on May 1, 2015, and after they returned to room temperature, 80% of them, which were placed in the same stalk directions, were used as the test samples to build discrimination model. The statistical data showed that 24 of samples were moldy core apples and the other 72 were healthy ones. A back-propagation(BP) neural network was adopted to set up a dependable discriminant model after analyzing the distribution diagram of samples, the inputs of which were apples’ diameters and characteristic spectral transmission intensities, while the output was apples’ healthy status. Apples’ healthy status only had a positive or negative value: 1 represented a healthy apple and-1 meant a bad one. The detection model was converted to embedded language and downloaded into MCU. Now an integrated and model-embedded device was made successfully. The remaining 20% apples of the total samples were used to test the designed detection device with the embedded intelligent discriminant BP model. All test sets were requested to have the same placement position as the apple position when BP model was built. The test result was that one in 6 sick apples was detected wrongly and all of 18 healthy apples were detected correctly, which showed an accuracy of 95.83%. The phenomenon that this apple was identified wrongly was due to the emptiness and mild moldy core in apple core, for it was easily sorted out when an apple had an obvious symptom. This study indicates that the designed detection device has a good ability to distinguish apples with moldy core strongly and reliably, and it will have a good application prospect in apple industry. Meanwhile the research method for detecting internal disease of apple in this paper also can provide a reference for other fruits.

Nondestructive Detection of Underlying Moldy Lesions of Apple Using Frequency Domain Diffuse Optical Tomography

Multiple-Factor Nondestructive Detection of Moldy Core in Apples Based on Transmission Spectra

Online Detection and Classification of Moldy Core Apples by Vis-NIR Transmittance Spectroscopy

Rapid and Low-Cost Detection of Moldy Apple Core Based on an Optical Sensor System

A Vis/NIR Device for Detecting Moldy Apple Cores Using Spectral Shape Features

Detection of Moldy Core of Apples Based on Visible/Near Infrared Transmission Energy Spectroscopy

Measurement of the Degree of Apple Mould Core Disease Based on Computer Vision

Detection of Moldy Core in Apples and Its Symptom Types Using Transmittance Spectroscopy

Nondestructive Detection of Apple Mouldy Core Disease Based on Unbalanced Dielectric Data

Early Detection of Mold-Contaminated Maize Kernels Based on Optical Coherence Tomography

Design of nondestructive detection device for moldy core in apples based on characteristic spectrum

Effective Modification Through Transmission Vis/NIR Spectra Affected by Fruit Size to Improve the Prediction of Moldy Apple Core

Non-Destructive Detection of Moldy Core in Apple Fruit Based on Deep Belief Network

SMOTE-based method for balanced spectral nondestructive detection of moldy apple core

Detection of apple moldy core disease by fusing vibration and Vis/NIR spectroscopy data with dual-input MLP-Transformer

Noncontact and Wide-Field Characterization of the Absorption and Scattering Properties of Apple Fruit Using Spatial-Frequency Domain Imaging

SMOTE-based method for balanced spectral nondestructive testing of moldy apple core

Nondestructive Detection Of The Internal Quality Of Apple Using X-Ray And Machine Vision

Measurement orientation compensation and comparison of transmission spectroscopy for online detection of moldy apple core

Development of mould core apple detection system using X-ray

Multi-frequency Microwave Dielectric Properties-Based Method Coupled with SPA-PLSDA Algorithm for Rapid Discrimination of Grain Mildew