Abstract:The frictional strength and sliding stability of faults are crucial in interpreting earthquake mechanisms and cycles. Herein, we report friction experiments on basalt fractures, using a self-designed triaxial apparatus that allows direct shear of samples under coupled hydro-mechanical conditions. Velocity-stepping (VS) and slide-hold-slide (SHS) experiments are performed on both bare and gouge-bearing surfaces of Xiashan basalt subjected to cyclic shear velocities at 1-30 mm/s, effective normal stresses of 1-5 MPa, and pore pressures of 70-300 kPa. The measured basalt friction coefficients are in the range of 0.67-0.74, which is sensitive to gouge thickness, normal stress, and water. Specifically, a reduction in friction coefficient is observed with an increment in gouge thickness, normal stress, and pore pressure. Based on the microscopic observation of the pre- and post-shearing sliding surfaces, this weakening effect in friction coefficient can be attributed to powder lubrication. Furthermore, the VS test results reveal predominantly velocity-strengthening behavior at investigated slip velocities, and this velocity strengthening behavior does not appear to be influenced by variations in normal stress, gouge thickness, and water. However, changes in sliding velocity and normal stress can lead to a shift between stable and unstable sliding. Specifically, stable sliding is favored by high sliding velocities and low normal stress applied in this study. Finally, we analyze the experimental data by calculating the rate-and-state parameters using the rate- and state-dependent friction (RSF) theory. Importantly, the calculated friction rate parameter (a-b) supports the velocity-strengthening behavior. Both frictional relaxation (Dmc) during hold periods and frictional healing (Delta mu) upon re-shearing are linearly proportional to the logarithmic hold time, which may be attributed to the growth in true contact area with hold time. This study sheds light on the roles of sliding velocity, and gouge thickness in controlling frictional strength and stability of basalt fractures. (C) 2023 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Different-Scale Heterogeneities in Segments of Active Faults and Their Influence on Slip Modes

Millennial Slip Rates along the Eastern Kunlun Fault: Implications for the Dynamics of Intracontinental Deformation in Asia

Two sides of a fault: Grain-scale analysis of pore pressure control on fault slip

Influence of Microroughness on Stick–Slip Characteristics of Fault Under Constant Normal Stiffness

Fluid environment controls along-strike variation in slip style: Midcrustal geological signatures from the Red River fault, China

Frictional Strength and Sliding Behaviors of an Analogue Rock-Fault Structure: A Laboratory Study

Segmentation of Slow Slip Events in South Central Alaska Possibly Controlled by a Subducted Oceanic Plateau

Laboratory observations of frictional stability and fault zone evolution under heterogeneous friction, rheology, and stress conditions

Slip rate gradients along the eastern Kunlun fault

Intermittent Criticality Multi‐Scale Processes Leading to Large Slip Events on Rough Laboratory Faults

Seismic Versus Aseismic Slip: Probing Mechanical Properties of the Northeast Japan Subduction Zone

How Fault‐Normal and Shear‐Parallel Stiffness Influence Frictional Sliding Behavior

The different effects of polished and post-slip roughnesses on fault stability

Fault geometric effects on characteristics of slow slip events in south-central Alaska

Towards a simple, comprehensive model of regular earthquakes and slow slip events, part I: one-dimensional model

The physics of fault friction: Insights from experiments on simulated gouges at low shearing velocities

Asperity Size and Neighboring Segments Can Change the Frictional Response and Fault Slip Behavior: Insights From Laboratory Experiments and Numerical Simulations

Laboratory Earthquakes Simulations—Emergence, Structure, and Evolution of Fault Heterogeneity

Asymmetrical Microfracture Density Across an Active Thrust Fault: Evidence from the Longmen Shan Fault, Eastern Tibet

Viscoelastic Simulation and Analysis on Deep Tectonic Deformation of the Longmen Shan Fault Zone

Experimental Investigation on Frictional Properties of Stressed Basalt Fractures