A Self-bias-flip with Charge Recycle Interface Circuit with No External Energy Reservoir for Piezoelectric Energy Harvesting Array
Zhen Li,Zhiyuan Chen,Jing Wang,Jiawei Wang,Junmin Jiang,Sijun Du,Xu Cheng,Xiaoyang Zeng,Jun Han
DOI: https://doi.org/10.1109/tpel.2023.3286399
IF: 5.967
2023-01-01
IEEE Transactions on Power Electronics
Abstract:This article presents a piezoelectric energy harvesting (PEH) interface circuit using a new self-bias-flip with the charge recycle (SBFR) technique without employing any additional energy reservoir. Traditional designs, including synchronous-switch harvesting on inductor (SSHI), synchronous-switch harvesting on capacitor (SSHC), synchronous electric charge extraction (SECE), etc., require additional capacitors or inductors to reverse the voltage on the PEH at the zero-crossing point. This design innovatively uses the inherent capacitors of the piezoelectric harvesters as the flipping capacitors. In order to improve the extract efficiency of the interface, the zero-crossing state is split into a charge recycle stage and a voltage-flip stage. For a piezoelectric array with $2^{n}$ PEHs, a configuration with (n-1) phases in the charge recycle stage is adopted to reduce the loss caused by direct charge neutralization. The charge redistribution loss is reduced by employing (2n+1) phases in the voltage-flip stage. The proposed principle has been implemented with discrete components and is verified by three different prototypes. The measurement results show that a flipping efficiency of 67% is achieved by utilizing SBFR with four PEHs. And the proposed interface can provide up to 5.2x improvement when compared with the full-bridge rectifier (FBR).
engineering, electrical & electronic