Abstract:Efficient coupling between optical fibers and on-chip photonic waveguides has long been a crucial issue for photonic chips used in various applications. Edge couplers (ECs) based on an inverse taper have seen widespread utilization due to their intrinsic broadband operation. However, it still remains a big challenge to realize polarization-insensitive low-loss ECs working at the O-band (1,260–1,360 nm), mainly due to the strong polarization dependence of the mode coupling/conversion and the difficulty to fabricate the taper tip with an ultra-small feature size. In this paper, a high-efficiency and polarization-insensitive O-band EC is proposed and demonstrated with great advantages that is fully compatible with the current 130-nm-node fabrication processes. By introducing an asymmetric bi-level dual-core mode converter, the fundamental mode confined in the thick core is evanescently coupled to that in the thin core, which has an expanded mode size matched well with the fiber and works well for both TE/TM-polarizations. Particularly, no bi-level junction in the propagation direction is introduced between the thick and thin waveguide sections, thereby breaking the critical limitation of ultra-small feature sizes. The calculated coupling loss is 0.44–0.56/0.48–0.61 dB across the O-band, while achieving 1-dB bandwidths exceeding 340/230 nm for the TE/TM-polarization modes. For the fabricated ECs, the peak coupling loss is ∼0.82 dB with a polarization dependent loss of ∼0.31 dB at the O-band when coupled to a fiber with a mode field diameter of 4 μm. It is expected that this coupling scheme promisingly provides a general solution even for other material platforms, e.g., lithium niobate, silicon nitride and so on.

High-efficiency Off-Axis Coupling of Rotating Optical Signals Based on Internal Conical Reflection

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Design of Optical Wavelength Demultiplexer Based on Off-Axis Meta-Lens

Coupling Characteristics of Star Waveguide Coupler

Theoretical analysis of enhancing the reciprocity of directional coupler

A Proposal of Zero Leakage-Loss Passive Optical Combiner Based on Nonreciprocal Waveguide

Novel fiber taper for efficient optical interconnection

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Design of a dual hollow beam optical antenna based on a Fresnel lens-conical lens combination

Highly efficient nonreciprocity and nonreciprocal photonic devices in a semiconductor quantum well

Unidirectionally Optical Coupling from Free Space into Silicon Waveguide with Wide Flat-Top Angular Efficiency.

Broadband Spin-Dependent Directional Coupler via Single Optimized Metallic Catenary Antenna

Analysis of alignment requirements for off-axis resonant cavity based on coupling efficiency

Blue-shifted Contra-Directional Coupling Between a Periodic and Conventional Dielectric Waveguides.

Adjustable, High-Sensitivity Optical Collimating Scheme for Free-Space Optic Links

Design of a Completely Vertical, Polarization-Independent Two-Dimensional Grating Coupler with High Coupling Efficiency

Proposal for a Near-Field Optomechanical System with Enhanced Linear and Quadratic Coupling

Free-Space Coupling Efficiency in A High-Q Deformed Optical Microcavity

Asymmetric bi-level dual-core mode converter for high-efficiency and polarization-insensitive O-band fiber-chip edge coupling: breaking the critical size limitation

Coupling Among Three Nonparallel Waveguides