Abstract:Heterogeneous electrocatalytic reactions only occur at the interface between the electrocatalyst and reactant. Therefore, the active sites are only necessary to be distributed on the surface of the electrocatalyst. Based on this motivation, here, we demonstrate a systematic study on surface tuning for a carbon-based electrocatalyst from metal-free (with the heteroatoms N and S, NS/C) to metal-containing surfaces (with Co, N, and S, CoNS/C). The CoNS/C electrocatalyst was obtained by pyrolyzing the Co precoordinated and p-toluenesulfonate-doped polypyrrole (PPy). It was found that the coordination of Co on the PPy ring tuned the final carbon electrocatalyst into a catalyst with a CoNx moiety-rich surface. In addition, the as-synthesized CoNS/C was determined to have a very high loading of cobalt up to 2.02 wt %. The pyrolysis of the cobalt-containing precursor tends to proceed toward a characteristic of a higher sp2 carbon content, a higher surface area, and more nitrogen as well as active nitrogen sites than its metal-free counterpart. The most distinguished feature for such a catalyst is that the truly most active component is only distributed on the surface, in contrast with that of the conventional metal–N-based catalyst present throughout the bulky structure. Especially, the electrocatalytic activity toward oxygen evolution reaction (OER) has been investigated experimentally and theoretically. The results showed that the OER performance of the carbon-based electrocatalyst was remarkably boosted after the introduction of Co with an overpotential decrease from 678 to 345 mV at 10 mA cm–2. Furthermore, CoNS/C displayed an excellent durability upon a long-term measurement. The apparent activation energy measurements revealed that the metal-rich surface contributed to overcome the energy barrier for OER. In addition, density functional theory calculations have been conducted to explain the correlated OER mechanism. This study is expected to provide an effective strategy for the design and the synthesis of highly active metal–nitrogen-type electrocatalysts with a high metal loading for various electrocatalytic reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17599?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17599</a>.Raman spectra and XRD patterns of NS/C and CoNS/C; SEM and HR-TEM images of NS/C; XPS survey spectrum of CoNS/C; TGA curves of CoNS/C and etched CoNS/C; calculated mass content of Co according to TGA; survey XPS spectrum and high-resolution C 1s, N 1s, and S 2p of NS/C; N2 sorption isotherms and BJH desorption pore size distributions of NS/C and CoNS/C; RRDE measurement of the Co–PPy electrode toward OER; LSV curves of CoNS/C electrocatalysts synthesized with various temperatures toward OER; content of N determined using XPS spectra in CoNS/C with different pyrolysis temperatures; fitted parameters for EIS results; LSV curves of CoNS/C and etched CoNS/C toward OER; summary of the overpotentials of the various electrodes at 10 mA cm–2; temperature-dependent LSV curves of the corresponding fittings of activation energy of NS/C, CoNS/C, and RuO2 toward OER; ADT tests of NS/C toward OER; SEM image of CoNS/C and NS/C after the ADT test; survey XPS spectrum and high-resolution N 1s and Co 2p of CoNS/C after the test; DFT calculations; and summary of the OER activity comparison for recent various advanced non-precious-metal-based electrocatalysts (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17599/suppl_file/am0c17599_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Modification of Pyridinic N and O-rich Defects in a Bifunctional Electrocatalyst with Enhanced Electrocatalytic Performance

Co-modified Ni/N-doped Carbon As Electrocatalysts for HER and OER

Defective Layered NiFe Double Hydroxides Anchored on Self-Supported CoNi-nitrogen Doped Carbon Nanotube Composite As Advanced Electrocatalyst for Oxygen Evolution Reaction

Zn-induced Defect Engineering to Activate Bimetallic NiCo Alloy@nitrogen-Doped Graphene Hybrid Nanomaterials for Enhanced Oxygen Reduction Reaction

The vital balance of graphitization and defect engineering for efficient bifunctional oxygen electrocatalyst based on N‐doping carbon/CNTs frameworks

Enhancing Defects of N-Doped Carbon Nanospheres Via Ultralow Co Atom Loading Engineering for a High-Efficiency Oxygen Reduction Reaction

Nitrogen and Carbon Co-Doped CoOx Nanostructures for Oxygen Reduction

Nitrogen and Carbon Co-Doped CoO x Nanostructures for Oxygen Reduction

A Bifunctional Hybrid Electrocatalyst for Oxygen Reduction and Evolution: Cobalt Oxide Nanoparticles Strongly Coupled to B,N-Decorated Graphene.

Bifunctional electrocatalyst for oxygen reduction/evolution reactions based on controlled morphology of nickel–cobalt nanoprickly particles composited by graphene and carbon nanotube

An Advanced Nitrogen‐Doped Graphene/Cobalt‐Embedded Porous Carbon Polyhedron Hybrid for Efficient Catalysis of Oxygen Reduction and Water Splitting

PdCoNi Alloy Nanoparticles Decorated, Nitrogen-Doped Carbon Nanotubes for Highly Active and Durable Oxygen Reduction Electrocatalysis

Coordination Engineering of Defective Cobalt-Nitrogen-Carbon Electrocatalysts with Graphene Quantum Dots for Boosting Oxygen Reduction Reaction

One-Pot Synthesis of Co/Co3O4/Co(OH)(2)/N-Doped Mesoporous Carbon for Both Oxygen Reduction Reactions and Oxygen Evolution Reactions

Bimetallic Co–Ni alloy nanoparticles loaded on nitrogen-doped wrinkled carbon nanospheres as high-performance bifunctional ORR/OER electrocatalyst in alkaline media

An advanced hollow bimetallic carbide/nitrogen-doped carbon nanotube for efficient catalysis of oxygen reduction and hydrogen evolution and oxygen evolution reaction

A New Method for Developing Defect-Rich Graphene Nanoribbons/onion-Like Carbon@co Nanoparticles Hybrid Materials As an Excellent Catalyst for Oxygen Reactions

Strongly Coupled 3D Hybrids of N‐doped Porous Carbon Nanosheet/CoNi Alloy‐Encapsulated Carbon Nanotubes for Enhanced Electrocatalysis

Surface Tuning to Promote the Electrocatalysis for Oxygen Evolution Reaction: From Metal-Free to Cobalt-Based Carbon Electrocatalysts

MOF-derived Co, Fe, and Ni co-doped N-enriched hollow carbon as efficient electrocatalyst for oxygen reduction reaction

Catalytic Performance and Mechanism of N-Coti@Cotio3 Catalysts for Oxygen Reduction Reaction