Abstract:A new molecularly imprinted polymer (MIP) has been prepared on silica beads using the radical “grafting from” polymerization method for selective extraction of minor contaminant mycotoxin of patulin (PTL). After the introduction of amino groups onto the silica surface with 3-aminopropyltriethoxysilane, azo initiator onto the silica surface was achieved by the reaction of surface amino groups with 4,4′-azobis(4-cyanopentanoic acid). The scale-up synthesis of MIP was then carried out in the presence of 6-hydroxynicotinic acid as template substitute, functional, and cross-linking monomers. The prepared sorbent was characterized using FT-IR spectroscopy, scanning electron microscopy, elemental analysis, and the adsorption–desorption selectivity, and the capacity characteristic of the polymer was investigated by a conventional batch adsorption test and Scatchard plot analysis. The results indicated that coated polymers had specific adsorption to PTL as compared with its co-occurring 5-hydroxymethyl-2-furaldehyde (hydroxymethylfurfural (HMF)), at the same bulk concentration for solution of PTL and HMF, the maximum absorbance in the solid-phase extraction (SPE) method to PTL were 93.97% or 0.654 μg/mg while to HMF they were 76.89% or 0.496 μg/mg. Scatchard analysis revealed that two classes of binding sites were formed in PTL-MIP with dissociation constants of 3.2 × 10 −2 and 5.0 × 10 −3 mg/mL and the affinity binding sites of 8.029 and 1.364 mg/g, respectively. The recoveries of PTL were more than 90% for the developed MISPE and around 75% for the traditional liquid–liquid extraction in spiked apple juice samples. It was concluded that the method is suitable for the scale-up synthesis of PTL-MIP grafted on silica, and the polymer can be effectively applied as SPE coupled with high-performance liquid chromatography (HPLC) for the determination of PTL in apple juice or other related products. Figure HPLC chromatograms of loading, washing, and eluting fractions of PTL and HMF from the MIP cartridge. Test samples in each chromatogram from top to bottom: mixed standard of HMF and PTL (10 mg/L), residue solution through the cartridge, first elution and second elution washed with 1 mL of 1% ( w / v ) HAc aqueous solution.

Mussel‐Inspired Membrane Adsorber with Thiol Ligand for Patulin Removal: Adsorption and Regeneration Behaviors

Removal of Patulin from Aqueous Solution Using Cross‐Linked Chitosan Beads

Adsorptive Removal of Patulin from Aqueous Solution Using Thiourea Modified Chitosan Resin.

Synthesis of Sulfhydryl Modified Bacterial Cellulose Gel Membrane and Its Application in Adsorption of Patulin from Apple Juice

Effective Detoxification of Patulin from Aqueous Solutions by Immobilized Porcine Pancreatic Lipase

Cell Membrane Mimetic Coating Immobilized by Mussel-Inspired Adhesion on Commercial Ultrafiltration Membrane to Enhance Antifouling Performance

Bioadsorption of Patulin from Kiwi Fruit Juice Onto a Superior Magnetic Chitosan

Adsorptive removal of patulin from apple juice using Ca-alginate-activated carbon beads.

Synthesis of triethylene tetramine-modified water-insoluble corn flour caged in magnetic chitosan resin and its adsorption application for removal of patulin from apple juice

Infiltration of Porcine Pancreatic Lipase into Magnetic Hierarchical Mesoporous UiO-66-NH2 Metal–organic Frameworks for Efficient Detoxification of Patulin from Apple Juice

Preparation and characterization of a molecularly imprinted polymer by grafting on silica supports: a selective sorbent for patulin toxin

Regenerable adsorptive membranes prepared by mussel-inspired co-deposition for aqueous dye removal

Adsorptive recovery of palladium(II) from aqueous solution onto cross-linked chitosan/montmorillonite membrane

A Novel G-C3n4-sh@konjac Glucomannan Composite Aerogel for Patulin Removal from Apple Juice and Its Photocatalytic Regeneration

Mussel Inspired Preparation of Functional Silica Nanocomposites for Environmental Adsorption Applications

Identification of Key Factors Involved in the Biosorption of Patulin by Inactivated Lactic Acid Bacteria (lab) Cells

Factors influencing the removal of patulin by cysteine

The determination of patulin from food samples using dual-dummy molecularly imprinted solid-phase extraction coupled with LC-MS/MS

Mussel-Inspired Multiwalled Carbon Nanotube Nanocomposite for Methyl Orange Removal: Adsorption and Regeneration Behaviors

Synthesis and characterization of nontoxic chitosan-coated Fe 3 O 4 particles for patulin adsorption in a juice-pH simulation aqueous.

Preparation of Magnetic Molecularly Imprinted Polymer for Selective Identification of Patulin in Juice.