Abstract:The performance of Cu-based catalysts in the low temperature CO2 conversion to methanol highly correlates with interfacial structure. In this paper, the interfacial structure of Cu/ZrO2 catalysts is tuned by changing the molar ratio and precipitation sequence of Cu and Zr precursors in the oxalate precipitation method. Structural characterizations demonstrate that the interface structure gradually transforms from the conventional ZrO2-supported nano-Cu interface to the Cu-supported nano-ZrO2 inverse interface with the ascending Cu/Zr ratio. The space–time yield (STY) of methanol over 90 molCu% Cu/ZrO2 inverse catalyst is 518 gCH3OH/kgcat/h, which far exceeds that of the optimized 40 molCu% Cu/ZrO2 catalyst (351 gCH3OH/kgcat/h). The inverse catalyst also exhibits the best methanol selectivity and lowest apparent activation energy. The correlation of the exposed Cu surface area, Cu particle size, and CO2 adsorption capacity with STYmethanol reveal that there is an optimal coverage of fine ZrO2 particles and the Cu supported nano-ZrO2 inverse configuration is a more suitable structure for methanol synthesis from CO2. High-pressure in situ DRIFTS experiment shows that the adsorbed formate and methoxy intermediates over 90 molCu% Cu/ZrO2 inverse catalyst are more reactive for further hydrogenation. In addition, the inverse configuration is more favorable for the methanol desorption from surface. The enhanced hydrogenation ability and relatively weak oxygenates adsorption of Cu-supported nano-ZrO2 interface is probably the main reasons for the improved catalytic performances of inverse catalysts.

Synergy between active sites of Cu-In-Zr-O catalyst in CO2 hydrogenation to methanol

A dual-site Cu-ZnO/Cu@Si catalyst boosts CO2 hydrogenation to CH3OH

Dual active sites over Cu-ZnO-ZrO2 catalysts for carbon dioxide hydrogenation to methanol

An Insight into Synergistic Metal-Oxide Interaction in CO2 Hydrogenation to Methanol over Cu/ZnO/ZrO2

The Synergetic Effect of Dual Active Sites in ZnO-ZrO 2 Catalyst for CO 2 Hydrogenation to Methanol

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation

The Synergetic Effect of Dual Active Sites in ZnO-ZrO<sub>2</sub> Catalyst for CO<sub>2 </sub>Hydrogenation to Methanol

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

Carbon coated In2O3 hollow tubes embedded with ultra-low content ZnO quantum dots as catalysts for CO2 hydrogenation to methanol

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Insights into the interfacial structure of Cu/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: Effects of Cu-supported nano-ZrO2 inverse interface

Highly active Pt/In2O3-ZrO2 catalyst for CO2 hydrogenation to methanol with enhanced CO tolerance: The effects of ZrO2

CO2 hydrogenation to methanol over the copper promoted In2O3 catalyst

Towards Maximizing the In2O3/m-ZrO2 Interfaces for CO2-to-methanol Hydrogenation.

Copper-zirconia interfaces in UiO-66 enable selective catalytic hydrogenation of CO2 to methanol

Unraveling Highly Tunable Selectivity in CO<sub>2</sub> Hydrogenation over Bimetallic In-Zr Oxide Catalysts

Exploring the ternary interactions in Cu–ZnO–ZrO2 catalysts for efficient CO2 hydrogenation to methanol

Unraveling Highly Tunable Selectivity in CO 2 Hydrogenation over Bimetallic In-Zr Oxide Catalysts

Combining Atomic Layer Deposition with Surface Organometallic Chemistry to Enhance Atomic-Scale Interactions and Improve the Activity and Selectivity of Cu-Zn/SiO2 Catalysts for the Hydrogenation of CO2 to Methanol

Dual-site Activation of H2 over Cu/ZnAl2O4 Boosting CO2 Hydrogenation to Methanol