Abstract:Tube overheating is the leading cause of boiler tube failures that had led to tremendous replacement and maintenance costs. Boiler tube temperature is simultaneously affected by the heating effect of hot combustion gas in the furnace and the cooling effect of steam flow in boiler tubes. Thus, prediction of tube temperature needs to include the simulations of both the gas and steam flows of the boiler in the model. To compromise the significant scale difference between the boiler furnace and tubes, a coupled model that integrates a three-dimensional (3D) CFD model describing the gas flow and combustion processes in the furnace with a one-dimensional (1D) hydrodynamic model describing the steam flow in the boiler waterwall tubes was developed in this paper. The 3D CFD and 1D hydrodynamic models are coupled by iterative data exchange of boiler heat flux and steam temperature between the two models. In this way, this coupled model can incorporate all the key parameters that strongly affect the waterwall tube temperature, including the distributions of boiler heat flux, steam temperature and the convective heat transfer coefficient of steam flow in boiler tubes. In particular, the critical effects of steam maldistribution caused by both the structure of tube network system and uneven heat absorption of parallel tubes on tube temperature can be resolved by this model. This coupled model provides the capability to predict the detailed distribution of waterwall tube temperature and locate the areas of tube overheating under different boiler operating parameters. This coupled model was employed to predict the tube temperature distribution of the spiral waterwall of a 350 MW supercritical boiler. The predicted results show that the areas having higher risk of tube overheating are located near the outlet of spiral waterwall tubes where the steam temperature is the highest and on the wall areas where the local wall heat flux is the highest. The results strengthen the necessity of incorporating both the gas and steam sides of boiler into the model for accurate prediction of waterwall tube temperature.

Modeling of Combustion and Hydrodynamics for a Coal-Fired Supercritical Boiler with Double-Reheat Cycle

Coupled Modeling of Combustion and Hydrodynamics for a Coal-Fired Supercritical Boiler

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Coupled Modeling of Combustion and Heat Transfer Process of a Supercritical CO2 Boiler

A Comprehensive CFD Combustion Model for Supercritical CFB Boilers

Coupled Modeling of Combustion and Hydrodynamics for a 1000 MW Double-Reheat Tower-Type Boiler

Integrated Numerical Model for Ultra/Supercritical CFB Boilers

Research on coupling calculation method of combustion and hydrodynamics for water walls in ultra-supercritical double-reheat boilers

Advanced Modeling Approaches for CFD Simulations of Coal Combustion and Gasification

Simulation of Dynamic Characteristics of Supercritical Boiler Based on Coupling Model of Combustion and Hydrodynamics

Combustion Modeling Of Cfb Boiler Furnace Based On An Euler-Euler Approach

Numerical Simulation of Flow and Heat Transfer Between Supercritical CO2 Tube and Flue Gas

Experimental Test, Numerical Analysis and Thermal Calculation Modeling of Hundreds Kwth-Class Supercritical CO2 Fossil-Fired Boiler System

Numerical Simulation On Fluid Flow And Combustion In A Subcritical Pressure Boiler With Various Hybrid Coal

A coupled combustion and hydrodynamic model for the prediction of waterwall tube overheating of supercritical boiler

Numerical Investigation of Heat Transfer Characteristics of Supercritical CO2 Tube in Combustion Chamber of Coal-Fired Boiler

Hydrodynamic Characteristics of Vertical Tubes With Low Mass Flux in Supercritical Pulverized Coal Boiler

Experimental test, numerical analysis and thermal calculation modeling of hundreds kW th -class supercritical CO 2 fossil-fired boiler system

Modeling of Combustion Process in 600 Mw Utility Boiler Using Comprehensive Models and Its Experimental Validation

Coupled Modeling of Combustion and Hydrodynamics for a 600 MW Bunsen-type Boiler

Thermal–hydraulic Calculation and Analysis of a 600 MW Supercritical Circulating Fluidized Bed Boiler with Annular Furnace