Abstract:Concrete is widely used in bridge foundation, water supply, and drainage engineering. On the one hand, the saturated concrete is always in the saturated state. In the cold winter, northeast China and the alpine region suffer from freezing disaster. On the other hand, it has to continue to bear the dynamic load action of vehicles and running water, which makes the stress state of saturated concrete more complicated under the coupling action of low temperature and dynamic load. In order to study the mechanical properties and fracture characteristics of saturated concrete under the coupling effect of low temperature and dynamic load, the impact compression tests of concrete under normal temperature 20°C, -5°C, -10°C, and -15°C were carried out with a diameter of 74 mm split Hopkinson pressure bar (SHPB). The stress-strain characteristics, energy dissipation, and failure modes of specimens under different low temperatures were studied. From a detailed point of view, the failure mechanism of low-temperature water-saturated concrete is expounded. The results show that under the same dynamic load, the dynamic stress-strain curve of saturated concrete changes obviously with the change of low temperature. The dynamic compressive strength of the natural specimen at room temperature is high while that of the water-saturated specimen is low, and the dynamic compressive strength is opposite at low temperature. At the same temperature, the energy time-history curves of concrete in the saturated state are different from those in the natural state, mainly in the plastic section. The energy time-history curves of saturated concrete are different at different temperatures, and the energy dissipation rate of saturated concrete increases linearly with the decrease of temperature. Under the experimental conditions, the dynamic strength of saturated concrete increases linearly with the decrease of temperature, and the peak strain of saturated concrete decreases linearly with the increase of temperature. With the decrease of temperature, the fragmentation of saturated concrete under the impact of the same air pressure gradually increases, and the integrity of the specimen gradually improves. Low temperature can improve the impact resistance of saturated concrete, which is consistent with the failure law of natural state concrete. The water-saturated low-temperature state of the concrete void is filled with ice crystal particles; for low-temperature water-saturated concrete in the impact of the dynamic load, the microstructure is affected by the ice crystal structure which is not easy to change; the specimen along the axial force direction microdefect development produces a crack, the crack along the parallel to the pressure direction of cracking, through the two ends of the specimen, and finally produces axial splitting tensile damage. The research results have important theoretical significance for the safety design of low temperature saturated concrete structures.

Quantitative Analysis of the Influence of Subfreezing Temperature on the Mechanical Properties of Steam-Cured Concrete

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

An Experimental Study on Mechanical Properties and Fracture Characteristics of Saturated Concrete under Coupling Effect of Low Temperature and Dynamic Load

Experimental Study and Mechanism Analysis on Frost Resistance of Normal Performance Concrete under Different Environments

Experimental investigation on electrical response and mechanical performance of cementitious materials at low temperatures

Experimental study on compressive strength of concrete with different water content experiencing cryogenic freeze-thaw cycles from room temperature to-190 ℃

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Experimental studies and numerical analysis of the dynamic mechanical properties of concrete at low temperatures

Influence of Steam Curing Method on the Performance of Concrete Containing a Large Portion of Mineral Admixtures

Investigating Concrete Performance: Compressive Strength and Pore-Structure Evolution in Simulated Permafrost Conditions of the Qinghai–Tibet Plateau Zone

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

Numerical simulation of the freezing process of concrete

Experimental study on compressive behavior of different strength grade concretes exposed to -190℃

Research on the Mechanical Properties of Concrete under Low Temperatures

Optimization of steam curing process for Chinese Western and Northeast regions' high‐speed railway concrete prefabricated components

Influence of High-Volume Mineral Mixtures and the Steam-Curing Temperatures on the Properties of Precast Concrete

EXPERIMENTAL RESEARCH ON DEFORMATION BEHAVIOR OF CONCRETE WITH DIFFERENT WATER CONTENTS AFTER CRYOGENIC FREEZE-THAW CYCLES FROM ROOM TEMPERATURE TO -190 ℃

Effects of Low Temperatures and Cryogenic Freeze-Thaw Cycles on Concrete Mechanical Properties: A Literature Review

Effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Experimental study on strength growth of low temperature curing concrete