Abstract:In the realm of non-powder printing additive manufacturing, the removal of supports from enclosed voids has long posed a formidable challenge. In response to this challenge, inspired by the traditional approach of designing either self-supporting or infill-supporting structures, this paper presents a novel topology optimization method that allows for the free choice between the two types of support within same enclosed voids. The infill material not only serves as a support during the additive manufacturing process but also becomes an integral component of the final design, never requiring to be removed. Firstly, a bi-directional nonlinear virtual temperature method (BN-VTM) is introduced to identify enclosed voids. The BN-VTM adds virtual heating material in regions below a predefined temperature threshold and heat-absorbing material in regions exceeding the threshold. This strategy ensures that the maximum temperature within enclosed voids adheres strictly to the specified range, enhancing the precision of enclosed void identification throughout the iterative process. On this basis, by combining the filtering/projection method, an interpolation function for enclosed void structures that encompasses both self-supporting and infill-supporting structures is developed. This function also is applied to identify overhanging interfaces within enclosed voids. Finally, by constraining the overhang angles, the proposed topology optimization method automatically determines whether to design self-supporting structures to achieve steeper boundaries or internal infill support structures within enclosed voids. The problem of minimizing compliance under material volume fraction constraints is investigated, and sensitivity analysis is derived. Several numerical and printing examples illustrate the effectiveness of the proposed method.

Topology Optimization Method with Elimination of Enclosed Voids

Self-supporting Topology Optimization for Additive Manufacturing

A Novel Application Framework for Self-Supporting Topology Optimization

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

A post-topology optimization process for overhang elimination in additive manufacturing: design workflow and experimental investigation

Structural topology optimization for additive manufacturing with free choice of self-supporting and infill-supporting structures

The Path-Engulfment Method for Topology Optimization of Structures

Explicit Tunnels and Cavities Control Using SIMP and MMA in Structural Topology Optimization

Topology optimization with a closed cavity exclusion constraint for additive manufacturing based on the fictitious physical model approach

2D Minimum Compliance Topology Optimization Based on a Region Partitioning Strategy

A Novel 3-D Topology Optimization Methodology Based on the Min-Cut Theorem

Topology optimization for 3D thin-walled structures with adaptive meshing

Topological constraints in 2D structural topology optimization

Topology optimization for additive manufacturing with length scale, overhang, and building orientation constraints

Topology Optimization of Self-supporting Porous Structures Based on Triply Periodic Minimal Surfaces.

Structural topology optimization considering both performance and manufacturability: strength, stiffness, and connectivity

Topology Optimization of 3D Structures with Design-Dependent Loads

Continuum Structure Topology Optimization Based on Implicit Boundary Representation

Topology Optimization Design of Continuum Structures under Stress and Displacement Constraints

Hole Appearance Constraint Method in 2D Structural Topology Optimization