The fate of fuel-nitrogen during the thermo-oxidative degradation of nitrogen-rich wood waste
Yipeng Feng,Chengguo Fu,Yi Wang,Yishui Tian,Tongchao Su,Hongyuan Zhao,Yaqi Zhang,Yongfeng Li
DOI: https://doi.org/10.1016/j.jaap.2021.105026
IF: 6
2021-05-01
Journal of Analytical and Applied Pyrolysis
Abstract:<p>In the present study, nitrogen-rich wood waste underwent the thermo-oxidative degradation based on an entrained flow reactor with a mixture of oxygen and argon as the reaction agent. In addition, by comparing the results from pine and corncob, the fuel-nitrogen transformations and distributions from the thermo-oxidative degradation of wood waste were analyzed. Furthermore, the effects of three operational parameters (i.e., temperature, equivalence ratio and oxygen concentration) on the fuel-nitrogen transformations and distributions from the thermo-oxidative degradation of wood waste were determined. According to the results, the fuel-nitrogen when undergoing the thermo-oxidative degradation of wood waste was primarily converted into the gaseous product. Thus, N<sub>2</sub> was determined as the major gaseous nitrogen-containing product, taking up nearly 76-96% of the total nitrogen. HCN and NH<sub>3</sub>, two primary gaseous nitrogenous pollutants generated in the thermo-oxidative degradation of wood waste, exhibited the significantly higher concentrations than those generated from the thermo-oxidative degradation of pine and corncob, and their max concentrations reached 1180 and 1060 mg/m<sup>3</sup>. Furthermore, the distributions of nitrogen-containing compounds in the gas, the char and the tar were observed to be noticeably impacted by temperature, equivalence ratio and oxygen concentration. Besides, the yield of N-tar decreased from 17.9 to 0% and 15.65 to 5.67%, and the N-pyrrole in char increased from 19 to 76.6% and from 68.9 to 76.5% with the increase in temperature and equivalence ratio.</p>
engineering, chemical,chemistry, analytical,energy & fuels