Abstract:Lithium sulfur (Li-S) batteries have been intensively concerned in recent years as next generation Li batteries1. Compared with state-of-the-art Li-ion batteries, Li-S batteries own ultrahigh theoretical capacity and energy density, which are considered as most promising candidates applied to electric vehicles and hybrid electric vehicles. However, insulation of sulfur and dissolution of polysulfides are two main issues in sulfur cathodes which hinder the cycle life and application safety of Li-S batteries. To overcome these issues, developing conductive hosts and coating materials are prevailing approaches to improve the performance of Li-S batteries. Herein, we report molecular layer deposited (MLD) alucone coating and nanoscale metal organic framework derived carbon (MOF-C) confined sulfur cathodes in Li-S batteries. Surface coating with carbon or metal oxides has been proven to be a promising approach towards mitigating the shuttle effect in Li-S batteries. An ideal coating material should both cover on based material completely to prevent sulfur migration and also allow Li-ions and electrons transferring through smoothly. Based on these requirements, atomic and molecular layer deposition (ALD and MLD) are ideal technique to synthesize ultrathin and conformal coatings due to the self-limiting nature2 , 3. For the first time, we demonstrate that an MLD alucone coating directly on sulfur electrodes can dramatically improve the cycling stability and capability of Li-S cells. Furthermore, the alucone coated sulfur cathode delivers a discharge capacity of 710 mAh g-1, which is over two times higher than the bare sulfur cathode after 100 cycles4. The alucone coating demonstrated long durability during cell cycling, which explores a new direction in the protection of sulfur cathodes. Porous structured materials are prevailing in sulfur cathode to confine sulfur molecule in host materials. Herein, we developed a new carbon family, metal organic framework derived carbon materials (MOF-Cs) with tunable porous structure via in-situ ammonia treatment5. The ammonia treated MOF-C as carbon host shows an impressive improvement on sulfur cathodes, which performed twice higher discharge capacity retention than that of the pristine MOF-C. This research sheds light to design MOF-C materials with controlled nanostructure not only for Li–S batteries, but also for expanded applications in different energy storage systems. References 1 Bruce, P. G., Freunberger, S. A., Hardwick, L. J. & Tarascon, J. M. Li-O2 and Li-S batteries with high energy storage. Nature materials11, 19-29, (2012). 2 Meng, X., Yang, X. Q. & Sun, X. Emerging applications of atomic layer deposition for lithium-ion battery studies. Adv Mater24, 3589-3615, (2012). 3 Li, X. et al. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application. Energy & Environmental Science7, 768, (2014). 4 Li, X., Lushington, A., Liu, J., Li, R. & Sun, X. Superior stable sulfur cathodes of Li-S batteries enabled by molecular layer deposition. Chem Commun (Camb)50, 9757-9760, (2014). 5 Li, X. et al. Tunable porous structure of metal organic framework derived carbon and the application in lithium–sulfur batteries. J Power Sources 302, 174-179, (2016). Figure 1

Elemental Sulfur As a Cathode Additive for Enhanced Rate Capability of Layered Lithium Transition Metal Oxides

Sulfur is a New High-Performance Additive toward High-Voltage LiNi0.5Co0.2Mn0.3O2 Cathode: Tiny Amount, Huge Impact

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Enhanced Electrochemical Performance of Ni‐Rich Layered Cathode Materials by Using LiPF6 As a Cathode Additive

High-performance LiNi0.8Mn0.1Co0.1O2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

Arranged redistribution of sulfur species and synergistic mediation of polysulfide conversion in lithium–sulfur batteries by a cactus structure MnO2/carbon nanofiber interlayer

Molecular Scale Coating and Nanoscale Carbon Cage Confined Sulfur Cathodes Applied in Lithium Sulfur Batteries

Enhancing performance of NiCo Sulfide composite cathode by Mn doping in Li-S batteries

O-, N-Coordinated single Mn atoms accelerating polysulfides transformation in lithium-sulfur batteries

Nitrogen-doped Carbonaceous Scaffold Anchored with Cobalt Nanoparticles As Sulfur Host for Efficient Adsorption and Catalytic Conversion of Polysulfides in Lithium-Sulfur Batteries

Oxygen-defective MnO2 Decorated Carbon Nanotube As an Effective Sulfur Host for High Performance Lithium Sulfur Battery

(FeO)2FeBO3 nanoparticles attached on interconnected nitrogen-doped carbon nanosheets serving as sulfur hosts for lithium–sulfur batteries

Vapor deposition of aluminium oxide into N-rich mesoporous carbon framework as a reversible sulfur host for lithium-sulfur battery cathode

Modifying the Cathode–Electrolyte Interphase by Sulfone-Based Additive to Enhance the Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4

Porous Fe2O3 Doped Cathodes for Lithium-Sulfur Batteries

Three-Dimensionally Hierarchical Ni/Ni3S2/S Cathode for Lithium-Sulfur Battery.

Modifying Γ-Mno2 to Enhance the Electrochemical Performance of Lithium-Sulfur Batteries

Spinel manganese-cobalt oxide nanospheres anchored on nitrogen-containing carbon nanofibers as a highly efficient redox electrocatalyst in lithium/polysulfides batteries

Cerium Oxide Nanocrystal Embedded Bimodal Micro-Mesoporous Nitrogen-Rich Carbon Nanospheres as Effective Sulfur Host for Lithium-Sulfur Batteries.

NiCo2S4 nanoparticles embedded in nitrogen-doped carbon nanotubes networks as effective sulfur carriers for advanced Lithium–Sulfur batteries

Synergistic Regulation of Polysulfides Conversion and Deposition by MOF‐Derived Hierarchically Ordered Carbonaceous Composite for High‐Energy Lithium–Sulfur Batteries