Abstract:Huge electromagnetic force during sudden short circuit can cause severe winding mechanical fault. Transformer tank vibration characteristics are closely related to winding mechanical condition. Transient vibration response on transformer tank under short circuit impact can be utilized to monitor winding condition and diagnose winding fault. Short circuit impact experiment according to IEC standard is performed on a 110kV transformer. 33 times impacts were performed at A-phase and tank vibration signal is recorded every time during the impact. Since transformer transient vibration signal is non-linear and non-stationary, this paper utilizes Hilbert-Huang Transform (HHT) methodology to analyze transformer vibration signal in time-frequency domain. 200Hz-1000Hz component in Hilbert spectrum is deeply studied. Image processing method is used to quantity the occurrence number of frequency above 200Hz in Hilbert spectrum. The result shows 800Hz-1000Hz component increases largely during 23 rd impact compared with the previous impact result. Thus, 800Hz-1000Hz component in Hilbert spectrum can be regarded as an indicator to diagnose winding fault. What's more, Short Circuit Impedance (SCI) experiment shows that SCI variation rate of A-phase changes 1 % after 24th impact and increases to −21.85% after 33rd impact. Suspended core experiment after the short circuit impact experiment reveals that severe winding mechanical fault occurs in both high voltage winding and medium voltage winding. Both of the results validate the correctness of Hilbert spectrum analysis of transient vibration response. Therefore, time-frequency vibration analysis can be used to monitor winding condition and diagnose winding fault.

Mechanical Fault Diagnostics of Power Transformer On-Load Tap Changers Using Dynamic Time Warping

Fault Diagnosis of OLTC Based on Time-Frequency Image Analysis of Vibration Signal

A Mechanical Fault Diagnosis Method for UCG-Type On-Load Tap Changers in Converter Transformers Based on Multi-Feature Fusion

Study on wavelet transform used for fault diagnosis of on-load tap changers based on vibration signal analysis

Online State Diagnosis of Transformer Windings Based on Time-Frequency Analysis

Mechanical Condition Detection of On-Load Tap-Changer in Converter Transformer Based on Narrowband Noise Assisted Multivariate Empirical Mode Decomposition Algorithm

Mechanical fault diagnosis of on‐load tap‐changer based on improved variational mode decomposition and relative density‐based outlier score

Time-frequency Analysis Based State Diagnosis of Transformers' Windings under the Short-Circuit Shock

ON-LINE DETECTION OF OLTC MECHANICAL PERFORMANCE

Fault Diagnosis of On-Load Tap Changer Based on Optimized Empirical Modal Decomposition Algorithm

Vibration Monitoring of On-load Tap-changer by Resonance-based Sparse Signal Decomposition

Winding Mechanical Fault Diagnosis Technique of Power Transformer Based on Time-Frequency Vibration Analysis

Power Transformer Fault Diagnosis Based On Controlled Switching Vibration Analysis

Power Transformers OLTC Condition Monitoring Based on Feature Extraction from Vibro-Acoustic Signals: Main Peaks and Euclidean Distance

Mechanical Condition Monitoring of On-load Tap Changers Based on Chaos Theory and K-means Clustering Method

Power Transformer Transient Modeling Considering the Effects of On-Load Tap Changer

Research on Vibration Signal of Transformer On- load Tap Changer Based on Kurtosis and Tunable Q-factor Wavelet Transform

On-Line Monitoring and Fault Diagnosis of Oltc Mechanical Performance

Experimental Investigation on Electrical and Mechanical Vibration Responses of Diverter Switches Within OLTCs

Vibration Monitoring of Converter Transformer Onload Tap-Changer Using Phase Space Reconstruction and Poincare Section

On-line diagnosis for a transformer winding's stateunder short-circuit shock