Abstract:Fluorinated electrolytes based on fluoroethylene carbonate (FEC) have been considered as promising alternative electrolytes for high-voltage and high-energy capacity lithium-ion batteries (LIBs). However, the compatibility of the fluorinated electrolytes with graphite negative electrodes is unclear. In this paper, we have systematically investigated, for the first time, the stability of fluorinated electrolytes with graphite negative electrodes, and the result shows that unlike the ethylene carbonate (EC)-based electrolyte, the FEC-based electrolyte (EC was totally replaced by FEC) is incapable of forming a protective and effective solid electrolyte interphase (SEI) that protects the electrolyte from runaway reduction on the graphite surface. The reason is that the lowest unoccupied molecular orbital energy levels are also lowered by the introduction of fluorine into the solvent, and the FEC solvent has poorer resistance against reduction, leading to instability on the graphite negative electrode. To tackle this problem, two lithium salts of lithium bis(oxalato)borate and lithium difluoro(oxalato)borate (LiDFOB) have been investigated as negative-electrode film-forming additives. Incorporation of only 0.5 wt % LiDFOB to a FEC-based electrolyte [1.0 M LiPF6 in 3:7 (FEC-ethyl methyl carbonate)] results in excellent cycling performance of the graphite negative electrode. This improved property originates from the generation of a thinner and better quality SEI film with little LiF by the sacrificial reduction of the LiDFOB additive on the graphite negative electrode surface. On the other hand, this additive can stabilize the electrolyte by scavenging HF. Meanwhile, the incorporated LiDFOB additive has positive influence on the interphase layer on the positive electrode surface and significantly decreases the amount of HF formation, finally leading to improved cycling stability and rate capability of LiNi0.5Mn1.5O4 electrodes at a high cutoff voltage of 5 V. The data demonstrate that the LiDFOB additive not only exhibits a superior compatibility with graphite but also improves the electrochemical properties of high-voltage spinel LiNi0.5Mn1.5O4 positive electrodes considerably, confirming its potential as a prospective, multifunctional additive for 5 V fluorinated electrolytes in high-energy capacity lithium-ion batteries (LIBs).

Fluoroethylene carbonate as the additive of lithium difluoro(oxalate)borate–sulfolane electrolytes to improve the electrochemical performance of LiNi 0.5 Mn 1.5 O 4 cathode

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Improving the Rate Performance and Stability of LiNi0.6Co0.2Mn0.2O2 in High Voltage Lithium-Ion Battery by Using Fluoroethylene Carbonate As Electrolyte Additive

Fluoroethylene Carbonate as Electrolyte Additive for Improving the electrochemical performances of High-Capacity Li 1.16 [Mn 0.75 Ni 0.25 ] 0.84 O 2 Material

Exploring High-Voltage Fluorinated Carbonate Electrolytes for LiNi0.5Mn1.5O4 Cathode in Li-ion Batteries

Fec As the Additive of 5 V Electrolyte and Its Electrochemical Performance for Lini0.5mn1.5o4

Effect of Fluoroethylene Carbonate As an Electrolyte Solvent in the LiNi0.5Mn1.5O4/Li4Ti5O12 Cell

Improved Performance of LiMn0.8Fe0.2PO4 by Addition of Fluoroethylene Carbonate Electrolyte Additive

Effect of Fluoroethylene Carbonate Electrolyte Additives on the Electrochemical Performance of Nickel-Rich NCM Ternary Cathodes

Influence of Fluoroethylene Carbonate As Co-Solvent on the High-Voltage Performance of LiNi1/3Co1/3Mn1/3O2 Cathode for Lithium-Ion Batteries

Research on the synergistic effect of fluoroethylene carbonate and lithium difluoro(oxalato)borate in electrolyte on LiNi0.5Mn1.5O4-based high-voltage lithium-ion batteries

Synergistic Effect of Fluorinated Solvents for Improving High Voltage Performance of LiNi 0.5 Mn 1.5 O 4 Cathode

Synergistic Effect of Fluorinated Solvents for Improving High Voltage Performance of LiNi0.5Mn1.5O4 Cathode

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Enhanced Electrochemical Performance of Lifepo4 Cathode with the Addition of Fluoroethylene Carbonate in Electrolyte

Enhanced Electrochemical Performance of LiNi0.5Mn1.5O4 Cathode by Application of LiPF2O2 for Lithium Difluoro(oxalate)borate Electrolyte

Multifunctional Fluoroethylene Carbonate for Improving High-Temperature Performance of LiNi0.8Mn0.1Co0.1O2||SiOx@Graphite Lithium-Ion Batteries

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Enhanced high voltage performance of LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathode via the synergistic effect of LiPO 2 F 2 and FEC in fluorinated electrolyte for lithium-ion batteries

Fluoroethylene carbonate as electrolyte additive to improve low temperature performance of LiFePO4 electrode

Fluorinated Electrolytes for Li-Ion Batteries: The Lithium Difluoro(oxalato)borate Additive for Stabilizing the Solid Electrolyte Interphase