Abstract:BackgroundPretreatment of biomass to maximize the recovery of fermentable sugars as well as to minimize the amount of enzyme inhibitors formed during the pretreatment is a challenge in biofuel process. We develop a modified Fenton pretreatment in a mixed solvent (water/DMSO) to combine the advantages of organosolv and Fenton pretreatments. The hemicellulose and cellulose in corncob were effectively degraded into xylose, glucose, and soluble glucose oligomers in a few hours. This saccharide solution, separated from the solid lignin simply by filtration, can be directly applied to the subsequent enzymatic hydrolysis and ethanol fermentation.ResultsAfter the pretreatment, 94% carbohydrates were recovered as soluble monosaccharide (xylose and glucose) and glucose oligomers in the filtrates, and 87% of solid lignin was recovered as the filter residue. The filtrates were directly applied to enzymatic hydrolysis, and 92% of raw corncob glucose was recovered. The hydrolysates containing the glucose and xylose from the enzymatic hydrolysis were directly applied to ethanol fermentation with ethanol yield equals 79% of theoretical yield. The pretreatment conditions (130 °C, 1.5 bar; 30 min to 4 h) are mild, and the pretreatment reagents (H2O2, FeCl3, and solvent) had low impact to environment. Using ferrimagnetic Fe3O4 resulted in similar pretreatment efficiency and Fe3O4 could be removed by filtration.ConclusionsA modified Fenton pretreatment of corncob in DMSO/water was developed. Up to 94% of the carbohydrate content of corncob was recovered as a saccharide solution simply by filtration. Such filtrate was directly applied to the subsequent enzymatic hydrolysis and where 92% of the corncob glucose content was obtained. The hydrolysate so obtained was directly applied to ethanol fermentation with good fermentability. The pretreatment method is simple, and the additives and solvents used have a low impact to the environment. This method provides the opportunity to substantially maximize the carbohydrate and solid lignin recovery of biomass with a comparatively green process, such that the efficiency of biorefinery as well as the bioethanol production process can be improved. The pretreatment is still relatively energy intensive and expensive, and further optimization of the process is required in large-scale operation.

Corncob Biorefinery for Platform Chemicals and Lignin Coproduction: Metal Chlorides As Catalysts

Enzymatic Hydrolysis of Corncob and Ethanol Production from Cellulosic Hydrolysate

Concentrated HCl Catalyzed 5-(Chloromethyl)furfural Production from Corn Stover of Varying Particle Sizes

High concentration ethanol production from corncob residues by fed-batch strategy.

Fenton Reaction-Modified Corn Stover to Produce Value-Added Chemicals by Ultralow Enzyme Hydrolysis and Maleic Acid and Aluminum Chloride Catalytic Conversion

Corn Stover Valorization by One-Step Formic Acid Fractionation and Formylation for 5-Hydroxymethylfurfural and High Guaiacyl Lignin Production.

Lactic Acid Production from Cellulosic Material by Synergetic Hydrolysis and Fermentation.

Catalytic conversion of corncob and corncob pretreatment hydrolysate to furfural in a biphasic system with addition of sodium chloride

Selective conversion of corncob hemicellulose to xylose via hydrothermal treatment with Fe2(SO4)3 and NaCl

Demonstrating Effectual Catalysis of Corncob with Solid Acid Sn-NUS-BH in Cyclopentyl Methyl Ether–Water for Co-Producing Reducing Sugar, Furfural, and Xylooligosaccharides

Ethanol Production from Corncob Assisted by Polyethylene Glycol and Conversion of Lignin-Rich Residue into Lignosulfonate and Phenolic Acids

Highly Efficient Production of Furfural from Corncob by Barley Hull Biochar-Based Solid Acid in Cyclopentyl Methyl Ether–Water System

Coupling process for preparing biomass-based furfural and levulinic acid from corncob: Extraction, green chemistry and techno-economic assessment

An integrated lignocellulose biorefinery process: Two-step sequential treatment with formic acid for efficiently producing ethanol and furfural from corn cobs

Catalytic hydrolysis of corncob for production of furfural and cellulose-rich solids: Product characterization and analysis

Preparation of reducing sugars from corncob by solid acid catalytic pretreatment combined with in situ enzymatic hydrolysis

Efficient pretreatment of lignocellulosic biomass with high recovery of solid lignin and fermentable sugars using Fenton reaction in a mixed solvent

Discovering a thermophilic xylanase and a β-xylosidase for synergistic degradation of corncob

Co-production of high-concentration fermentable sugar and lignin-based bio-adhesive from corncob residue via an enhanced enzymatic hydrolysis

Fast and Selective Degradation of Biomass for Xylose, Glucose and Lignin under Mild Conditions

Enzymatic Hydrolysis of Corncob Residues of Furfural Manufacture and Optimum Conditions for Cellulose Conversion