Abstract:In recent years, ultrasound computed tomography (USCT) systems have been developed for early detection of breast cancer. In this paper, a multiline acquisition (MLA) beamforming method for USCT is proposed, and the steering angle of the receiving multiline for ring array is discussed. The principle of MLA beamforming is to produce several receiving lines from one transmitted event. It can provide images with less noise and artifacts, higher resolution and better contrast compared to the traditional B-mode imaging method. The validation of the MLA is described through the breast phantom experiment and in vivo experiments. The radio-frequency (RF) data were captured by the USCT system developed in the Medical Ultrasound Laboratory. The main components of the USCT system consist of a ring-type transducer, a multiplexer, a channel data acquisition system and a workstation. The ring-type transducer with 1024 elements has an inner diameter of 200 mm. The center frequency of the transducer is 2.5 MHz. Experimental results show that the reconstructed images by MLA method get the higher signal to noise ratio (SNR) and more homogeneous background compared to the delay and sum (DAS) method. For the breast phantom, MLA gives the better contrast properties for the hyperechoic cyst. Artifacts are removed more efficiently while the clutters are suppressed simultaneously. For in vivo experiments, the CR of the upper arm image increases from 3.18 dB to 24.23 dB, and the CR of the lower leg image increases from 19.19 dB to 45.17 dB in the regions of interest (ROI). The skeletal muscle, the bone of the upper arm and the lower leg can be distinguished more clearly. In the breast experiment, all the evaluation indices including CR, CNR, and SNR are improved at ROIs, and more details of the breast tissue can be shown.

A Fast Contrast Improved Zero-Phase Filtered Delay Multiply and Sum in Ultrasound Computed Tomography

A Joint Method of Coherence Factor and Nonlinear Beamforming for Synthetic Aperture Imaging with a Ring Array

Zero-Phase Filtered Delay Multiply and Sum in Ultrasound Computed Tomography

Filtered Delay Multiply and Sum Combined with Space-Time Smoothing Coherence Factor in Ultrasound Imaging

Low complexity adaptive ultrasound image beamformer combined with improved multiphase apodization with cross-correlation

Ultrasound computed tomography by frequency-shift low-pass filtering and least mean square adaptive filtering

Double Stage Delay Multiply and Sum Beamforming Combined with Full-Lag Spatial Coherence in Ultrasound Imaging

Synthetic Aperture Focusing Technique for 3-D Ultrasound Computed Tomography

Coherence Factor-Like Beamforming for Ultrasound Computed Tomography

Improved Subarray Coherence Factor Beamformer for Ultrasound Plane-Wave Imaging

Combined Truncated Sidelobe Suppression and Iterative Adaptive MAP Beamforming for Ultrasound Imaging

Fast Focusing of Ultrasound Synthetic Aperture Imaging by Using Virtual Array and Nonuniform Fast Fourier Transform

Spatial Smoothing Coherence Factor for Ultrasound Computed Tomography

Application of condition coherence factor based on truncated composite method in ultrasound imaging

Combination of variational mode decomposition and coherent factor for ultrasound computer tomography

An optimised delay multiply and sum ultrasonic imaging algorithm based on sparse arrays and parallel computing

A Prior-Information-Based Combination Solution for Picking the Difference of Time-of-Flight in Ultrasound Computed Tomography

Enhanced Ultrasound Image Formation with Computationally Efficient Cross-Angular Delay Multiply and Sum Beamforming

A Low-Complexity Beamformer for Ultrasound Imaging Based on Sub-Beamformer and Multi-Apodization With Cross-Correlation

Multiline Acquisition Beamforming for Ultrasound Computed Tomography

Fast Imaging Combined with Joint-Transmitting-Receiving Beamforming Based on a Ring Array in Ultrasound Computed Tomography