Abstract:Organic carbonyl compounds have received great attention as electrode materials because of their fast reduction–oxidation kinetics, environment friendliness, and high theoretical capacity. Especially, the small molecular quinones, such as anthraquinone（AQ）, can possess high theoretical(257 mA·h·g -1 ) and a discharge–charge voltage of 2.2–2.3 V, implying that it has the potential of up to 565 W·h·kg -1 energy density. However, it suffers from high solubility in organic electrolytes and low conductivity,leading to rapid capacity fading and inferior rate performance. Herein, we report 2,6-diaminoanthraquinone（2,6-AAQ） uniform selfassembly into a three-dimensional（3D） porous structure graphene foam, which was successfully fabricated through a gentle hydrothermal synthesis reaction with simultaneous in situ condensation of 2,6-AAQ on the reduced graphene surface, as a highperformance cathode for Lithium-organic batteries. Benefiting from the formation of a covalent bond（—CO—NH —） between the amino group（—NH 2 ） of 2,6-AAQ and the carboxyl group（—COOH） of oxidized graphene, the molecular structure of AQ is uniformly anchored into a 3D graphene foam architecture. The strategy simultaneously solved the high dissolution and low conductivity of AQ.The as-obtained hybrid composites were characterized by various techniques. SEM and EDS mapping images demonstrated that the 2,6-AAQ within the hybrid architecture was not only uniformly anchored on the surface but also tightly wrapped in the interior of graphene foam. This unique architectural structure can improve the electronic conductivity of 2,6-AAQ in the lithiation process and effectively inhibit the dissolution of 2,6-AAQ in electrolytes, which is beneficial to hoist the electrochemical performance of the composite materials. XPS, XRD, FTIR, and Raman results indicated that hydrothermally assisted chemical bonding occurred between 2,6-AAQ and r GO, significantly facilitating the mass electron transformation and ion diffusion from graphene substrate to 2,6-AAQ for the fast reduction–oxidation reaction. Combined with the above results, UV–Vis spectroscopy tests also further disclosed that the 2,6-AAQ and r GO linked by covalent bonds significantly decrease solubility compared with 2,6-AAQ, indicating the greatly increased cycling stability of the hybrid material. Additionally, ex situ FTIR characterization results verified that the composite cathode material with two carbonyls（C=O） active sites has good lithium storage performance. By optimizing the 2,6-AAQ concentration, the 25% 2,6-AAQ in the asprepared composite was used as the high-performance cathode for the lithium-ion battery. The composite material can display a high initial discharge capacity of 212.2 mA·h·g -1 at 100 mA·g -1 （based on the 2,6-AAQ mass） and a reversible capacity of 184 mA·h·g -1 with a capacity retention of 86.7% after 100 cycles at 500 mA·g -1 current density. This excellent electrochemical performance is attributed to fast lithium-ion diffusion and electric transport between the 2,6-AAQ and the 3D porous structure hybrid architecture, which also proposes a facile strategy for the immobilization of the small molecular quinones to construct advanced organic lithium batteries.

Nanopore Confined Anthraquinone in MOF-derived N-doped Microporous Carbon As Stable Organic Cathode for Lithium-Ion Battery

Nitrogen-Doped Hierarchical Porous Carbon-Promoted Adsorption of Anthraquinone for Long-Life Organic Batteries.

Advanced Metal-Organic Frameworks Based on Anthraquinone-2,3-Dicarboxylate Ligands as Cathode for Lithium-Ion Batteries

Hierarchical MOF-derived Layered Fe3O4 QDs@C Imbedded on Graphene Sheets As a High-Performance Anode for Lithium-ion Storage

A Two‐dimensional Metal−Organic Framework as Promising Cathode for Advanced Lithium Storage

Surpassing the Organic Cathode Performance for Lithium-Ion Batteries with Robust Fluorinated Covalent Quinazoline Networks

Unveiling Nanopore-Confined Crystallization and Coordination/De-coordination Mechanisms of Quinone Molecules for Ultrahigh-Rate and Ultralong-Cyclability Aqueous Zinc-Organic Batteries

Significantly Stable Organic Cathode for Lithium-Ion Battery Based on Nanoconfined Poly(anthraquinonyl Sulfide)@mof-Derived Microporous Carbon

High-Rate Performance Organic Cathodes Based on Carbon Nanotube-Modified Anthraquinone-Based Polyimides for All-Organic Lithium/Sodium-Ion Batteries

MOF-Derived ZnO Nanoparticles Covered by N-Doped Carbon Layers and Hybridized on Carbon Nanotubes for Lithium-Ion Battery Anodes.

Engineering Ag nanoparticles and amorphous MoOx on three dimensional N-doped carbon networks for enhanced lithium storage performance

An Organic Molecular Cathode Composed of Naphthoquinones Bridged by Organodisulfide for Rechargeable Lithium Battery

Nanoporous Composites of CoO x Quantum Dots and ZIF-Derived Carbon as High-Performance Anodes for Lithium-Ion Batteries

Polyanthraquinone as a Reliable Organic Electrode for Stable and Fast Lithium Storage

Realizing high-performance of quinone-based cathode via multiple active centers for aqueous zinc ion batteries

ZIF-8-derived ultrasmall ZnO nanoparticles embedded in porous carbon nanocage as anode material for lithium-ion batteries

Zinc Oxide Quantum Dots Embedded Porous Carbon Nanosheets for High-Capacity and Ultrastable Lithium-Ion Battery Anodes

Naphthoquinone-Based Composite Cathodes for Aqueous Rechargeable Zinc-Ion Batteries

Preparation of 2,6-Diaminoanthraquinone/reduced Graphene Oxide-Based Composites As Cathode Materials for Organic Lithium Batteries

Rational design of 3D N-doped carbon nanosheet framework encapsulated ultrafine ZnO nanocrystals as superior performance anode materials in lithium ion batteries

Metal-organic Frameworks Derived In-based Nanoparticles Encapsulated by Carbonaceous Matrix for Highly Efficient Energy Storage