Abstract:A green and novel FeCl3‐catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo‐based hierarchical porous carbons (BHPCs) with ultra‐high specific surface area and excellent electrochemical properties. Summary Herein, a green and novel FeCl3‐catalyzed hydrothermal pretreatment method is adopted to convert the bamboo shavings waste into bamboo‐based hierarchical porous carbons (BHPCs) with ultra‐high specific surface area and excellent electrochemical properties. Utilizing this mild FeCl3 catalyst can not only promote the dehydration, condensation, and carbonization of bamboo shavings to catalyze the formation of hydrochar, but also facilitate the development of the pore structure of hydrochar. Moreover, the effects of different FeCl3 solution concentrations, activation temperatures, and KOH/hydrochar ratios on the pore structure of BHPCs and the electrochemical performance of supercapacitors are thoroughly investigated. Compared with the hydrothermal carbonization without FeCl3 addition, the BHPCs (1‐BHPC‐800‐5) electrode materials obtained by FeCl3‐catalyzed hydrothermal pretreatment have superior specific surface area (up to 3688 m2 g−1) and total pore volume (as high as 1.989 cm3 g−1). Meanwhile, the best‐performing 1‐BHPC‐800‐5 demonstrates outstanding electrochemical performance in supercapacitor applications, providing a pleasant capacitance of 378 F g−1 at 0.5 A g−1 and capacitance retention of 96.6% after 10 000 charge/discharge cycles at 5.0 A g−1 in 6.0 M KOH electrolyte. The energy density can reach 10.3 Wh kg−1 at a power density of 250 W kg−1 in a two‐electrode system. Therefore, this novel and efficient catalytic hydrothermal pretreatment method offers a promising prospect for converting waste biomass into hierarchical porous carbon materials with a large specific surface area and excellent electrochemical properties. Key Points Adopting a green FeCl3‐catalyzed hydrothermal pretreatment method to convert bamboo shavings waste into BHPCs. BHPCs exhibit a hierarchical porous structure and an ultra‐high specific surface area (up to 3688 m2 g−1). A very high capacitive performance (378 F g−1 at 0.5 Ag−1) is achieved. The excellent rate performance (nearly 71% capacitance retention), outstanding cycle stability (capacitance retention of 96.6% after 10 000 charge/discharge cycles) and large energy density (10.3 Wh kg−1 at 250 W kg−1) are demonstrated.

High Electrochemical Cycling Performance Through Accurately Inheriting Hierarchical Porous Structure from Bagasse

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

Co2SiO4/CoO Heterostructure Anchored on Graphitized Carbon Derived from Rice Husks with Hierarchical Pore As Electrode Material for Supercapacitor

Engineering of N, P co-doped hierarchical porous carbon from sugarcane bagasse for high-performance supercapacitors and sodium ion batteries

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Porous carbon derived from cashew nut husk biomass waste for high-performance supercapacitors

The changing structure by component: Biomass-based porous carbon for high-performance supercapacitors

Construction of N, O Codoped Petal-like Hierarchical Porous Carbon with an Ultrahigh Specific Surface from Waste Bamboo for High-Performance Supercapacitors

Porous structure engineering of N-doped carbons for enhanced mass transfer towards High-Performance supercapacitors and Li-Ion batteries

Promoting hierarchical porous carbon derived from Bamboo via copper doping for high-performance supercapacitors

Hierarchical pores from microscale to macroscale boost ultrahigh lithium intercalation pseudocapacitance of biomass carbon

Synthesis and design of biomass-derived heteroatom-doped hierarchical porous carbon systems for high-voltage supercapacitors

Preparation of biomass-based N, P, and S co-doped porous carbon with high mesoporosity based on the synergistic effect of NaOH/thiourea and melamine phosphate and its application in high performance supercapacitors

B, O and N Codoped Biomass-Derived Hierarchical Porous Carbon for High-Performance Electrochemical Energy Storage

Design and structure optimization of 3D porous graphitic carbon nanosheets for high-performance supercapacitor

Synthesis of biomass-derived N,O-codoped hierarchical porous carbon with large surface area for high-performance supercapacitor

Tailoring hierarchically porous structure of biomass-derived carbon for high-performance supercapacitors

Hierarchical Porous Carbon Derived from Recycled Bamboo Waste As Supercapacitors Electrodes Based on FeCl 3 ‐catalyzed Hydrothermal Pretreatment: Pore Regulation and High‐performance Analysis

KHCO3 Chemical-Activated Hydrothermal Porous Carbon Derived from Sugarcane bagasse for Supercapacitor Applications

Interconnected hierarchical porous carbon synthesized from freeze‐dried celery for supercapacitor with high performance

Hierarchical porous carbon derived from recycled bamboo waste as supercapacitors electrodes based on FeCl3‐catalyzed hydrothermal pretreatment: Pore regulation and high‐performance analysis