Abstract:The layered rock mass widely exists in mining, construction, transportation, and water conservancy projects, and the damage phenomena of plate crack and spalling often occurs in the process of coal and rock dynamic disaster in deep mining. Therefore, the rock mass nearby excavation surface is usually considered to be composed of layers of thin plate rock mass to reveal the damage and failure mechanism of rock mass. In the whole dynamic process of mining and coal and rock dynamic disaster, rock mass would bear the dynamic disturbance from mine earthquake, and at present, the mechanical characteristics of rock mass are mainly studied under static load, while dynamic mechanical response characteristics and the mechanisms of dynamic damage, failure, and disaster-causing are still unclear. This study mainly focused on the dynamic response characteristic and failure mechanism of rock mass based on a rectangular thin plate model. The frequency equations and deflection equations of the thin plate rock mass with different boundary conditions (S-F-S-F, S-C-S-C, and C-C-C-C) were established under free vibration by the thin plate model and the dual equation of the Hamilton system, and the deflection equations under impact load were derived based on the Duhamel integral. And then, the effective vibration modes of the thin plate rock mass with different boundary conditions and their natural frequencies were obtained by Newton’s iterative method. Based on the third-strength theory and the numerical simulation results by LS-DYNA, the maximum shear of the effective vibration modes and the processes of damage and failure under impact load were analyzed. The research results showed that the initial position of damage and failure may be determined by effective vibration mode with the lowest frequency; the develop tendency of which by the combined actions of other effective vibration modes and the effective vibration modes with lower frequency could have greater influence on the process of damage and failure of the thin plate rock mass, which are beneficial to revealing the mechanism of coal and rock dynamic disaster.

Numerical–analytical Model for Transient Dynamics of Elastic-Plastic Plate under Eccentric Low-Velocity Impact

Transient Impact Response Analysis of an Elastic–plastic Beam

Numerical simulation of the disk fragment impacting resistance of plate target

Study on characterization of moderate energy impact response of elastic-plastic plate structure

Elastoplastic impact of a long rod on a flexible large plate

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

A novel oblique impact model for elastic solids

Numerical analysis of dynamic buckling of rectangular plates subjected to intermediate-velocity impact

3-D Dynamic Elastic–plastic FEA for Rotating Disk Indirect Bar–bar Tensile Impact Apparatus: Numerical Analysis for the Generation of Mechanically-Filtered Incident Stress Pulses

Dynamic Analysis of Plates on Two-Parameter Viscoelastic Foundation Under Impact Load

The Dynamic Response and Failure Model of Thin Plate Rock Mass under Impact Load

Multiple sub-impacts phenomenon and influences on responses of elastic-plastic beam

Response of Elastic-Plastic Plate Embedded Cracks at Different Orientation under Impact Load

The dominating dimensionless numbers of an elastic-plastic thin plate under dynamic loading

Prediction of Coefficient of Restitution for Impact Elastoplastic Spheres Considering Finite Plate Thickness

An Efficient Numerical Method to Analyze Low‐velocity Impact Response of Carbon Fiber Reinforced Thermoplastic Laminates

Study on Dynamic Response and Energy Absorbing Characteristics of Shallow Spherical Shells Under Impact Loads

Nonlinear dynamic analysis for a rectangular HSLA steel plate subjected to low velocity impact

Dynamic responses of corrugated cylindrical shells subjected to nonlinear low-velocity impact

Development of an integrated model for prediction of impact and vibration response of hybrid fiber metal laminates with a viscoelastic layer

A Godunov ‐type discrete element model for elastic‐viscoplastic continuum impact problems