Abstract:Great progresses have been made in static size effect of concrete, while almost no efforts have been conducted in dynamic size effect of concrete. The macro nonlinearity and size effect of concrete should be attributed to the inner heterogeneities. Herein, a meso-scale simulation method was built to study the dynamic failure and size effect of concrete. In the approach, the concrete heterogeneities were explicitly described, and the strain rate effect for the meso components were also taken into account. Taking squared concrete specimens as examples, the dynamic compressive failure and the size effect of concrete under different strain rates from 10(-5)/s to 200/s were modelled and investigated. The effect of strain rate on the size effect in compressive strength of concrete was also explored. The simulation results indicate that, there exists a critical strain rate ((epsilon) over dot(cr) = 1/s). When the applied strain rate is less than the critical strain rate, the compressive strength decreases with increasing the specimen size and the size effect on the dynamic compressive strength is weakened as the strain rate increases. The dynamic compressive strength turns to be independent on the structural size of the specimen for the critical strain rate. When the applied strain rate is more than the critical strain rate, the compressive strength increases with the increase of specimen size and the size effect on the dynamic compressive strength is enhanced as the strain rate increases. Finally, based on the influencing mechanism of strain rate effect to dynamic strength and size effect, a Static and Dynamic unified Size Effect Law (i.e. SD-SEL) for compressive strength of concrete was established. The proposed size effect law was also calibrated by the meso-scale simulation results.

Mesoscopic numerical simulation of dynamic size effect on the splitting-tensile strength of concrete

Meso-scale simulations of size effect on concrete dynamic splitting tensile strength: Influence of aggregate content and maximum aggregate size

Dynamic size effect of concrete under tension: A numerical study

Size Effect on Dynamic Splitting Tensile Strength of Concrete: Mesoscale Modeling

Meso-scale Modelling of the Size Effect on Dynamic Compressive Failure of Concrete under Different Strain Rates

Numerical Study of Concrete Dynamic Splitting Based on 3D Realistic Aggregate Mesoscopic Model

Numerical Simulation of Dynamic Tensile-Failure of Concrete at Meso-Scale

Size Effect on Static Splitting Tensile Strength of Concrete: Experimental and Numerical Studies

MESOSCALE MODELING ON SIZE EFFECT OF SPLITTING TENSILE STRENGTH AND FLEXURAL COMPRESSIVE STRENGTH OF CONCRETE

Study of dynamic behavior of concrete under splitting tensile tests based on mesomechanics

Size Effect in Dynamic Splitting Tensile Strength of Concrete: Experimental Investigation

Finite element modelling of mesoscale concrete material in dynamic splitting test

MESOSCOPIC SIMULATION STUDY OF THE INFLUENCE OF AGGREGATE SIZE ON MECHANICAL PROPERTIES AND SPECIMEN SIZE EFFECT OF CONCRETE SUBJECTED TO SPLITTING TENSILE LOADING

Coupling Influence of Low Strain Rate and Structural Size on Splitting-Failure of Concrete: Tests and Mechanism Analysis

Mesoscopic Study of the Dynamic Behaviours of High-Strength Concrete

Mesoscopic Simulations on the Strength and Size Effect of Concrete under Biaxial Loading

Numerical Simulation And Experimental Study On Dynamic Splitting Tensile Behaviour Of Concrete

Mesoscopic simulation of the dynamic tensile behaviour of concrete based on a rate-dependent cohesive model

Impact Splitting Tensile Experiments of Concrete and Numerical Modeling by Meso-Scale Discrete Elements

High Strain Rate Splitting Tensile Tests of Concrete and Numerical Simulation by Mesoscale Particle Elements

Size Effect Modelling for Dynamic Biaxial Compressive Strength of Concrete: Influence of Lateral Stress Ratio and Strain Rate