Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Solution Processed High Performance Short Channel Organic Thin-Film Transistors with Excellent Uniformity and Ultra-low Contact Resistance for Logic and Display

High-performance Organic Thin-film Transistors: Principles and Strategies

Highly Efficient All‐Solution‐Processed Low‐Voltage Organic Transistor with a Micrometer‐Thick Low‐k Polymer Gate Dielectric Layer

Organic thin-film transistors for organic light-emitting flat-panel display backplanes

Eliminating Leakage Current in Thin‐Film Transistor of Solution‐Processed Organic Material Stack for Large‐Scale Low‐Power Integration

Large‐Area Processable Ultrathin Organic Transistors with High Mobility and Mechanical Stabilities

Endothelin A-receptor blockade in experimental diabetes improves glucose balance and gastrointestinal function.

Editorial: High-Performance Organic Thin-Film Transistors

High-Yield, Scaling-Up Fabrication of Fermi-Level-Pinning-Free Organic Thin-Film Transistor Arrays with Printed Van der Waals Contacts

[The vascularization of the epididymis of the boar with special reference to perfusion fixation].

Modulating Contact Properties by Molecular Layers in Organic Thin‐film Transistors

Modification of Indium Tin Oxide Electrodes by Fluorinated Silanes for Transparent Organic Thin-Film Transistors

Full-solution-processed High Mobility Zinc-Tin-oxide Thin-Film-transistors

High Performance Indium‐Gallium‐Zinc Oxide Thin Film Transistor via Interface Engineering

Facile Four-Mask Processes for Organic Thin-Film Transistor Integration Structure With Metal Interconnect

Gold compounds alter distribution of protein kinase C activity in human neutrophils

Low-voltage operating, high mobility top-gate structural flexible organic thin-film transistor with a one-step spin-coated binary polymer gate dielectric

Organic thin film transistor with a simplified planar structure

Top‐Gate Organic Thin‐Film Transistors Constructed by a General Lamination Approach

Water-Processed Ultrathin Crystalline Indium–Boron–Oxide Channel for High-Performance Thin-Film Transistor Applications

Achieving low-voltage operating high-mobility organic thin-film transistors by a multi-layered gate dielectric