Abstract:The operation of underwater vehicles in deep waters is a very challenging task. The use of AUVs (Autonomous Underwater Vehicles) is the preferred option for underwater exploration activities. They can be autonomously navigated and controlled in real time underwater, which is only possible with precise spatio-temporal information. Navigation and positioning systems based on LBL (Long-Baseline) or USBL (Ultra-Short-Baseline) systems have their own characteristics, so the choice of system is based on the specific application scenario. However, comparative experiments on AUV navigation and positioning under both systems are rarely conducted, especially in the deep sea. This study describes navigation and positioning experiments on AUVs in deep-sea scenarios and compares the accuracy of the USBL and LBL/SINS (Strap-Down Inertial Navigation System)/DVL (Doppler Velocity Log) modes. In practice, the accuracy of the USBL positioning mode is higher when the AUV is within a 60° observation range below the ship; when the AUV is far away from the ship, the positioning accuracy decreases with increasing range and observation angle, i.e., the positioning error reaches 80 m at 4000 m depth. The navigational accuracy inside and outside the datum array is high when using the LBL/SINS/DVL mode; if the AUV is far from the datum array when climbing to the surface, the LBL cannot provide accurate position calibration while the DVL fails, resulting in large deviations in the SINS results. In summary, the use of multi-sensor combination navigation schemes is beneficial, and accurate position information acquisition should be based on the demand and cost, while other factors should also be comprehensively considered; this paper proposes the use of the LBL/SINS/DVL system scheme.

Inverted Ultra-Short Baseline Signal Design for Multi-Auv Navigation

The Integrated Navigation System of Auv "Xuanwu"

Design and experimental results of passive iUSBL for small AUV navigation

Passive Inverted Ultra-Short Baseline Positioning for a Disc-Shaped Autonomous Underwater Vehicle: Design and Field Experiments

Passive Localization of an Autonomous Underwater Vehicle with Periodic Sonar Signaling

Integrated Navigation for an Autonomous Underwater Vehicle Carrying Synthetic Aperture Sonar

Enhancement of the Aided Inertial Navigation System for an AUV via micronavigation

Research of Ultrashort Baseline Positioning Method Based on Depth Information

Multi-AUV Localization for an Underwater Acoustic Sensor Network

An Integrated Auv Navigation Method Using Bayes Filtering

AUV Docking Based on USBL Navigation and Vision Guidance

Designing of Preamble Signal for the Integrated Underwater Communication and Positioning

Experimental Analysis of Deep-Sea AUV Based on Multi-Sensor Integrated Navigation and Positioning

Signal Design and Processing for Underwater Acoustic Positioning and Communication Integrated System

Navigation and positioning system design of an AUV underwater docking

An Ultra-Short Baseline Underwater Positioning System with Kalman Filtering

Underwater navigation using a single beacon based on the time delays of the direct signals and the surface-reflected signals

A High-Precision, Ultra-Short Baseline Positioning Method for Full Sea Depth

A Passive Acoustic Positioning Algorithm Based on Virtual Long Baseline Matrix Window

AUV Positioning Method Based on Tightly Coupled SINS/LBL for Underwater Acoustic Multipath Propagation.

A Low-Cost Communication-Based Autonomous Underwater Vehicle Positioning System