Abstract:In this work, the effect of rotary forward extrusion technique on the development of texture structure and mechanical anisotropy of Mg–12Gd–4Y–2Zn–0.4Zr sheets is studied. The experiments were carried out using a large-sized alloy (φ330 × 1100 mm) at an extrusion temperature of 460 °C and a high extrusion ratio (10.18). The average grain size of the alloy gradually decreases from 126.3 μm to 10 μm with increasing cumulative stress during rotary forward extrusion, the size of the second phase also decreases significantly and is uniformly distributed. At the same time, an abnormal texture (an abnormal extrusion texture with c-axis parallel to extrusion direction) parallel to the extrusion direction (ED) was formed by the rotation of grains, which was caused by the rotation of the basal plane along the principal stress axis driven by the continuous non-basal plane slip under high stress conditions. Dynamic recrystallized (DRX) also plays an essential role in the formation of the abnormal texture, where the DRX process produces a proportion of grains with the nucleation orientation . The subsequent preferential growth of these grains further promotes the rotation of the majority of grains oriented in the direction. Although the nucleation phase of DRX contributes to the formation of abnormal texture, the preferred growth stage of grains has a greater influence on the abnormal texture. In addition, due to the introduction of strong shear stresses, the degree of buckling and fragmentation of the Long Period Stacking Ordered (LPSO) phase is enhanced in all directions, which in turn reduces the morphological differences in different directions, ultimately leading to a significant weakening of mechanical anisotropy. This weakening of mechanical anisotropy is closely related to the homogeneity of the grain size and the differences in the morphology of the LPSO phases. Graphical

The Role of Long-Period Stacking Ordered Phases in the Deformation Behavior of a Strong Textured Mg-Zn-Gd-Y-Zr Alloy Sheet Processed by Hot Extrusion

Deformation-induced Dynamic Precipitation of 14H-LPSO Structure and Its Effect on Dynamic Recrystallization in Hot-Extruded Mg-Y-Zn Alloys

The influences of long period stacking order phase and texture on compressive behavior of an extruded magnesium alloy

Effect of the Morphology of Long-Period Stacking Ordered Phase on Mechanical Properties and Corrosion Behavior of Cast Mg-Zn-Y-Ti Alloy

Influence of the morphology of long-period stacking ordered phase on the mechanical properties of as-extruded Mg-5Zn-5Y-0.6Zr magnesium alloy

Deformation Behavior of an Extruded Mg–Dy–Zn Alloy with Long Period Stacking Ordered Phase

Deformation Mechanism of Mg-Gd-Y-Zn-Zr Alloy Containing Long-Period Stacking Ordered Phases During Hot Rolling

Effects of Bulk LPSO Phases on Mechanical Properties and Fracture Behavior of As-Extruded Mg-Gd-Y-Zn-Zr Alloys

Texture, microstructure and mechanical properties of an extruded Mg-10Gd-1Zn-0.4Zr alloy: Role of microstructure prior to extrusion

Mechanical Properties of the Mg-Gd-Y-Zn-Zr Alloys with Different Morphologies of Long-Period Stacking Ordered Phases

Deformation Behavior of Mg-Y-Ni Alloys Containing Different Volume Fraction of LPSO Phase During Tension and Compression Through In-Situ Synchrotron Diffraction

Microstructure and Mechanical Properties of Extruded Mg-Gd-Y-Zn-Zr Alloys Filled with Intragranular LPSO Phases

The Effect of Morphology of the Long-Period Stacking Ordered Phase on Mechanical Properties of the Mg-7Gd-3Y-1Nd-1Zn-0.5Zr (wt.%) Alloy

The Roles of Long Period Stacking Ordered Structure and Zn Solute in the Hot Deformation Behavior of Mg-Gd-Zn Alloys

Study of Tensile and Compressive Behavior of ECO-Mg97Gd2Zn1 Alloys Containing Long-Period Stacking Ordered Phase with Lamellar Structure

Texture Evolution, Deformation Mechanism and Mechanical Properties of the Hot Rolled Mg-Gd-Y-Zn-Zr Alloy Containing LPSO Phase

Improved Workability and Ductility of the Mg-Gd-Y-Zn-Zr Alloy Via Enhanced Kinking and Dynamic Recrystallization

Formation of Abnormal Texture and Anisotropy Weakening Mechanism of Mg–Gd–Y–Zn–Zr Sheets by Rotary Forward Extrusion

Bimodal Grain Structure, Phase Transformation, and Mechanical Properties of a Mg-Gd-Y-Zn-Zr Alloy During Hot Extrusion

Enhanced Mechanical Properties of Mg-Gd-Y-Zn-Mn Alloy by Tailoring the Morphology of Long Period Stacking Ordered Phase

The Role of Long Period Stacking Ordered Phase in Dynamic Recrystallization of a Mg–Gd–Y–Zn–Zr Alloy during Multi-Directional Forging Process