Abstract:A precise understanding of the catalytic surface of nanoparticles is critical for relating their structure to activity. For silica-supported Pt-Cr bimetallic catalysts containing nominal Cr/Pt molar ratios of 0, 1.9, and 5.6, a fundamental difference in selectivity was observed as a function of composition for propane dehydrogenation, suggesting different surface structures. The formation of bimetallic catalysts and the phases present were confirmed by synchrotron in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) of the nanoparticle as a function of reduction temperature. With the increasing reduction temperature, there is a systematic increase in the Pt L-III edge X-ray absorption near edge structure (XANES) energy, which is consistent with the incorporation of more metallic Cr into the nanoparticles, Pt L-III edge extended X-ray absorption fine structure (EXAFS) shows that the nanoparticles are Pt rich regardless of the reduction temperature, and XRD shows the presence of both Pt and Pt3Cr phases at temperatures below about 700 degrees C. For the latter, a full Pt3Cr intermetallic alloy forms after reduction at 800 degrees C. This work also presents a method for the characterization of the catalytic surface by the analysis of XAS difference spectra and XRD difference patterns of the (reduced and oxidized) catalysts. The surface analysis suggests that Pt3Cr formation begins at the surface, and at low reduction temperatures, a core-shell morphology is formed containing a Pt core with a Pt3Cr surface. By combining the XAS and XRD analyses with transmission electron microscopy (TEM) particle sizes, the thickness of the shell can be approximated. All evidence indicates that the shell thickness increases with the increasing reduction temperature until a full alloy is formed after reduction at about 800 degrees C but only if there is enough Cr2O3 available near Pt nanoparticles to form Pt3Cr. Catalysts containing a full monolayer coverage of Pt3Cr have higher olefin selectivity (>97%) compared with partially covered Pt surfaces (88%).

Identification of Surface Structures in Pt3Cr Intermetallic Nanocatalysts

Identification of a Pt3Co Surface Intermetallic Alloy in Pt–Co Propane Dehydrogenation Catalysts

Changes in Catalytic and Adsorptive Properties of 2 Nm Pt3Mn Nanoparticles by Subsurface Atoms.

Heterogeneous catalysts need not be so "heterogeneous": monodisperse Pt nanocrystals by combining shape-controlled synthesis and purification by colloidal recrystallization.

Decoding Atomic-Level Structures of the Interface Between Pt Sub-nanocrystals and Nanostructured Carbon

Crystal-Phase-Mediated Restructuring of Pt on TiO2 with Tunable Reactivity: Redispersion Versus Reshaping

Evolution of Structure and Chemistry of Bimetallic Nanoparticle Catalysts under Reaction Conditions

Revealing the surface atomic arrangement of noble metal alkane dehydrogenation catalysts by a stepwise reduction-oxidation approach

Quantitative Analysis of the Reduction Kinetics Responsible for the One-Pot Synthesis of Pd–Pt Bimetallic Nanocrystals with Different Structures

Preparation, Structure and Catalytic Activity of Pt-Pd Bimetallic Nanoparticles on Multi-Walled Carbon Nanotubes

Catalytic Cracking of N-Decane over Monometallic and Bimetallic Pt–Ni/MoO3/La–Al2O3 Catalysts: Correlations of Surface Properties and Catalytic Behaviors

Surface Hexagonal Pt1Sn1 Intermetallic on Pt Nanoparticles for Selective Propane Dehydrogenation.

Study of the Interfacial Structure of a Pt/α-Al2O3 Model Catalyst under High-Temperature Hydrogen Reduction

Surface structure modulating of Ni-Pt bimetallic catalysts boosts n-dodecane steam reforming

Atomic Structure Of Pt3ni Nanoframe Electrocatalysts By In Situ X-Ray Absorption Spectroscopy

(Invited) Surface Sites Probing and Electrocatalytic Property of Atomic Sub-Monolayer and Multilayer on Tetrahexahedral Nanocrystals

Atomic Structure Evolution of Pt–Co Binary Catalysts: Single Metal Sites versus Intermetallic Nanocrystals

Pt/Ru/C Nanocomposites for Methanol Electrooxidation: How Ru Nanocrystals' Surface Structure Affects Catalytic Performance of Deposited Pt Particles

Structure evolution of Pt–3d transition metal alloys under reductive and oxidizing conditions and effect on the CO oxidation: a first-principles study

Theoretical Design of Platinum-Sliver Single Atom Alloy Catalysts with CO Adsorbate-Induced Surface Structures.

Sintering behavior of carbon-supported Pt nanoparticles and the effect of surface overcoating