A Novel Composite Interlayer Assembled for C/SiC-GH99 Brazed Joints

J. H. Yang,L. X. Zhang,Z. Sun,J. C. Feng

DOI: https://doi.org/10.1016/j.jmapro.2019.01.030

IF: 5.684

2019-01-01

Journal of Manufacturing Processes

Abstract:A novel composite interlayer composed of Ti-40Ni-20Nb/Nb/Ni-19Cr-10Si was designed. By using that, a reliable C/SiC-GH99 brazed joint was successfully obtained at 1200 degrees C for 20 min. Results demonstrated that the composite interlayer could relieve the residual stress. Practically, the diffusion of Ni was drastic inhibited at the GH99 side. The formation of brittle Ni-Si intermetallics at the C/SiC side was thus greatly decreased. The effects of the Nb foil thickness in the composite interlayer on the interfacial microstructure were studied. When the original thickness of the Nb foil was larger than 100 mu m, the residual Nb foil could inhibit the diffusion of Ni and optimize the interfacial microstructure. A desirable interfacial microstructure composed of (Ti, Nb)Ni, (Ti, Nb)C and NiNbSi was obtained. The optimal shear strength at room temperature was 123 MPa. The high temperature shear strength was 88 MPa, 75 MPa and 57 MPa at 400 degrees C, 600 degrees C and 800 degrees C, respectively.