Facile Synthesis of Defect-Modified Thin-Layered and Porous g-C 3 N 4 with Synergetic Improvement for Photocatalytic H 2 Production
Yanbin Huang,Jun Liu,Chao Zhao,Xiaohao Jia,Mengmeng Ma,Yuanyuan Qian,Cheng Yang,Kong Liu,Furui Tan,Zhijie Wang,Xiaobao Li,Shengchun Qu,Zhanguo Wang
DOI: https://doi.org/10.1021/acsami.0c14262
2020-11-11
Abstract:Modulating and optimizing the diverse parameters of photocatalysts synergistically as well as exerting these advantages fully in photocatalytic reactions are crucial for the sufficient utilization of solar energy but still face various challenges. Herein, a novel and facile urea- and KOH-assisted thermal polymerization (UKATP) strategy is first developed for the preparation of defect-modified thin-layered and porous g-C<sub>3</sub>N<sub>4</sub> (DTLP-CN), wherein the thickness of g-C<sub>3</sub>N<sub>4</sub> was dramatically decreased, and cyano groups, nitrogen vacancies, and mesopores were simultaneously introduced into g-C<sub>3</sub>N<sub>4</sub>. Importantly, the roles of thickness, pores, and defects can be targetedly modulated and optimized by changing the mass ratio of urea, KOH, and melamine. This can remarkably increase the specific area, improve the light-harvesting capability, and enhance separation efficiency of photoexcited charge carriers, strengthening the mass transfer in g-C<sub>3</sub>N<sub>4</sub>. Consequently, the photocatalytic hydrogen evolution efficiency of the DTLP-CN (1.557 mmol h<sup>–1</sup> g<sup>–1</sup>, λ > 420 nm) was significantly improved more than 48.5 times with the highest average apparent quantum yield (AQY) of 18.5% and reached as high as 0.82% at 500 nm. This work provides an effective strategy for synergistically regulating the properties of g-C<sub>3</sub>N<sub>4</sub>, and opens a new horizon to design g-C<sub>3</sub>N<sub>4</sub>-based catalysts for highly efficient solar-energy conversion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14262?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14262</a>.SEM images of MCN-B, MCN, M<i><sub>x</sub></i>U<i><sub>y</sub></i>, and <i>m</i>KCN; BJH pore-size distribution and the table of surface area pore parameters for MCN-B, MCN,10KMCN, M<sub>1</sub>U<sub>3</sub>, M<sub>1</sub>U<sub>4</sub>, and 10KCN; AFM images of the prepared samples; the XRD patterns and FTIR spectra of MCN-B, MCN, M<i><sub>x</sub></i>U<i><sub>y</sub></i>, and <i>m</i>KCN; the table of <sup>13</sup>C MAS NMR spectra peaks; the table of OEA data; the table of the XPS data including binding energies, atom ratios of the samples, and the atom contents of the samples determined from the ratios of peak areas; the high-resolution XPS spectra of C 1s and N 1s in MCN-B, MCN, 10KMCN-B, 10KMCN, M<sub>1</sub>U<sub>3</sub>-B, M<sub>1</sub>U<sub>3</sub>, 10KCN-B, and 10KCN; UV–vis diffuse reflectance spectra and plots of (α<i>h</i>ν)<sup>1/2</sup> versus <i>E</i><sub>g</sub> (eV) for MCN-B, MCN, M<i><sub>x</sub></i>U<i><sub>y</sub></i>, <i>m</i>KCN (<i>m</i> = 1, 5, 10, 20, 40, 100, and 200), and <i>m</i>KMCN (<i>m</i> = 10, 20, 40, 100, and 200), respectively; the VB-XPS spectra and band structures of samples; the calculated results of DFT for g-C<sub>3</sub>N<sub>4</sub> with the cyano group and the N vacancy, respectively; the photoluminescence spectra and time-resolved fluorescence spectra of the samples; the table of the photoluminescence decay time of the samples derived from the time-resolved PL spectra; the electrochemical impedance spectra of the samples; the photocatalytic H<sub>2</sub> evolution rates and H<sub>2</sub> evolution curves of samples; the table of the photocatalytic activity of the 10KCN compared with the previous reported g-C<sub>3</sub>N<sub>4</sub>; the TEM micrograph, XRD patterns, and FTIR spectra of 10KCN before and after the photocatalytic reaction; and HPLC and LC/MS measurements of the aqueous solution (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14262/suppl_file/am0c14262_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology