Power generation by PVDF-TrFE/graphene nanocomposite films

Liangke Wu,Min Jing,Yaolu Liu,Huiming Ning,Xuyang Liu,Shifeng Liu,Liyang Lin,Ning Hu,Liangbing Liu
DOI: https://doi.org/10.1016/j.compositesb.2019.01.055
2019-01-01
Abstract:Poly(vinylidene difluoride)(PVDF) and its copolymers are promising materials to fabricate self-powered devices, while their relatively low power generation capability limits their applications. In this work, graphene was added into poly(vinylidene-trifluoroethylene)(PVDF-TrFE) to prepare excellent piezoelectric composite films by a solution-casting method. The PVDF-TrFE/graphene containing 0.15 wt% graphene generated a calibrated open circuit of 12.43 V, which is 104% higher than that without graphene. Similarly, the harvested power density was increased by 302% (AC circuit) and 359% (DC circuit), respectively. The XRD spectra indicate that the PVDF-TrFE/graphene with an extremely low content of graphene did not work well on the phase formation in the initial crystallization. The crystallinity degree of the untreated films was about 40%. After stretching, the crystallinity degree increased to above 60%, especially for the films containing 0.15 wt% graphene (67%). Hence, stretching was the main factor to increase the crystallinity degree. This study also confirmed that the heat treatment could further improve the crystallinity of the stretched films to some extent.
What problem does this paper attempt to address?