Abstract:The characteristics of a passive nonlinear isolator which is developed by parallelly adding a negative stiffness corrector to a linear spring are studied. The negative stiffness corrector, which is formed by Euler buckled beams can offer negative stiffness to the isolator at the equilibrium position in order to lower the overall dynamic stiffness of the isolator and without sacrificing the support capacity compared to the linear isolator. The static characteristics of the stiffness corrector as well as the nonlinear isolator are presented and the system parameters which can offer zero stiffness at the equilibrium point are derived. The restoring force of the nonlinear isolator after loaded is approximated using the Taylor expansion to pure cubic stiffness. The dynamic equation is established and the frequency response curves (FRCs) are obtained by using the Harmonic Balance Method (HBM) for both force and displacement excitations. The force and displacement transmissibility of the nonlinear isolator are defined and investigated, and the isolation performance is compared with an equivalent linear isolator which can support the same mass with the same static deflection as the nonlinear isolator. The effects of the amplitude of the excitation and damping ratio on the transmissibility performance are considered. The results demonstrate that the proposed zero dynamic stiffness nonlinear isolator can outperform the equivalent linear one for certain frequencies, and the performance is related to the magnitude of the excitation amplitude. Unlike the linear isolator, in the nonlinear isolator for base displacement excitation, unbounded response or transmissibility can occur which is not observed for force excitation case. The performance can also be improved by adjusting the configurations of the beams. Some useful guidelines for choosing system parameters such as the properties of the beams and the stiffness relationship between the beams and the linear spring are given.

An Experiment Investigation on the Effect of Coulomb Friction on the Displacement Transmissibility of a Quasi-Zero Stiffness Isolator

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Investigation on a Quasi-Zero-stiffness Vibration Isolator under Random Excitation

Resonance and Performance Analysis of a Harmonically Forced Quasi-Zero-Stiffness Vibration Isolator Considering the Effect of Mistuned Mass

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Experimental investigation of a non-smooth quasi-zero-stiffness isolator

An Improved Structural Analysis Method for Isolator with Quasi-Zero-Stiffness Characteristic

On the characteristics of a quasi-zero stiffness isolator using Euler buckled beam as negative stiffness corrector

Design and Analysis of A Quasi-Zero Stiffness Isolator Using A Slotted Conical Disk Spring As Negative Stiffness Structure

Linear and Nonlinear Stiffness Compensation for Low-Frequency Vibration Isolation: a Comparative Study

Dynamic Characteristics Analysis for a Quasi-Zero-stiffness System Coupled with Mechanical Disturbance

Theoretical Design and Characteristics Analysis of a Quasi-Zero Stiffness Isolator Using a Disk Spring as Negative Stiffness Element

On the characteristics of a quasi-zero-stiffness vibration isolator with viscoelastic damper

Quasi-zero stiffness vibration isolators with slender Euler beams as positive stiffness elements

Influence of Excitation Amplitude and Load on the Characteristics of Quasi-zero Stiffness Isolator

Study on the Effect of Nonlinear Inertia on the Vibration Isolation Performance of Quasi-Zero-stiffness Isolators

A Study of a Pendulum-Like Vibration Isolator with Quasi-Zero-Stiffness

Design and experimental study of a two-stage nonlinear vibration isolators with quasi-zero stiffness

Investigations on a Vertical Isolation System with Quasi-Zero Stiffness Property