Abstract:This article introduces a novel, single‐layer, low‐profile, circularly polarized metasurface antenna. Through characteristic mode analysis, the optimization of a 3× 3 rectangular metasurface structure was performed. Two orthogonal modes were selected as the operating modes, and improvements to the metasurface structure were made to achieve a 90∘ phase difference between these modes. The adoption of a coplanar waveguide structure enables the excitation of the metasurface, facilitating circularly polarized radiation performance for the two selected modes. The antenna's dimensions are 40 mm × 40 mm × 3 mm, featuring a −10 dB impedance bandwidth of 27.8% (4.49–5.94 GHz). The 3 dB axial ratio bandwidth is 14.2% (5.25–6.05 GHz), with a maximum gain of 7.26 dBi. This article introduces a novel, single‐layer, low‐profile, circularly polarized metasurface antenna. Through characteristic mode analysis, the optimization of a 3× 3 rectangular metasurface structure was performed. Two orthogonal modes were selected as the operating modes, and improvements to the metasurface structure were made to achieve a 90∘ phase difference between these modes. The adoption of a coplanar waveguide structure enables the excitation of the metasurface, facilitating circularly polarized radiation performance for the two selected modes. The antenna's dimensions are 40 mm × 40 mm × 3 mm (0.67 λ × 0.67 λ × 0.05 λ ), featuring a −10 dB impedance bandwidth of 27.8% (4.49–5.94 GHz). The 3 dB axial ratio bandwidth is 14.2% (5.25–6.05 GHz), with a maximum gain of 7.26 dBi.

Modulated Metasurface Antennas Design Based on Generalized Boundary Conditions

Design Method for Modulated Metasurface Antennas Composed of Anisotropic Elements Based on Generalized Boundary Conditions

Phase-tuning Metasurface for Circularly Polarized Broadside Radiation in Broadband

Leveraging Parallel Speedup for Intelligent Design of Metasurface

Research and Design of Metasurface Antennas Based on Composite Dielectric Materials

Design of High-Gain Metasurface Antenna Based on Characteristic Mode Analysis

Characterization of Multiple-Layer Anisotropic Metasurfaces Based on Generalized Boundary Conditions

Analysis of a Waveguide-Fed Metasurface Antenna

Synthesis of Modulated Dielectric Metasurfaces for Precise Antenna Beamforming

Compact circularly polarized metasurface antenna based on characteristic mode analysis

The Study On The Antenna With Metasurface

A Thin Planar Antenna Based On Gradient Metasurface

Designing metasurface through surface impedance mapping and equivalent circuit model

Generalized acoustic impedance metasurface

Metantenna: When Metasurface Meets Antenna Again

Miniaturized Broadband Metasurface Antenna Using Characteristic Mode Analysis

Design and Analysis of a Bow-Tie Slot-Coupled Wideband Metasurface Antenna

Design of a Metasurface Antenna with Pattern Diversity

Design of Metasurface Broadband Circularly Polarized Antenna Based on Characteristic Mode Analysis

Analytical Modeling of a Two-Dimensional Waveguide-Fed Metasurface

A New Homogenization-Free Boundary Condition Towards Aperiodic Metasurface Design Using Full-Wave Surrogate Models of Printed Circuits