A Sidelobe-Reduced, Four-Beam Array Antenna Fed by a Modified $4\times4$ Butler Matrix for 5G Applications
Son Trinh-Van,Jong Min Lee,Youngoo Yang,Kang-Yoon Lee,Keum Cheol Hwang
DOI: https://doi.org/10.1109/tap.2019.2905783
IF: 5.7
2019-07-01
IEEE Transactions on Antennas and Propagation
Abstract:A sidelobe-reduced, four-beam array antenna fed by a modified $4 \times 4$ Butler matrix (BM) is proposed for 5G applications. Two attenuators are utilized in two external channels of the BM to realize a tapered amplitude distribution. In addition, three H-slots are employed as decoupling structures to enhance the isolation between the input ports. The modified BM is then cascaded with a $4 \times 7$ microstrip comb-line array antenna to establish four steering beams with high gains and reduced sidelobe levels. A prototype of the proposed four-beam array antenna is fabricated and experimentally demonstrated. The overall dimensions of the fabricated prototype are $95 \times 32 \times 0.254$ mm3. The total area of the modified BM is only $30 \times 32$ mm2. The measured reflection coefficients and coupling levels between the input ports are less than −15 dB over the target frequency range of 27.525–28.325 GHz. At the center frequency of 27.925 GHz, the measured four beams point toward −16.2°, +40.8°, −39.4°, and +12.6° with corresponding measured peak gains of 17.52, 16.55, 15.74, and 17.87 dBi. The measured peak sidelobe levels for each beam are −16.7, −10.3, −10.9, and −14.5 dB, respectively. Radiation patterns are also presented and discussed.
telecommunications,engineering, electrical & electronic