Abstract:Controlled islanding has been proposed as a last resort action to stop blackouts from happening when all standard methods have failed. Successful controlled islanding has to deal with three important issues: when, and where to island, and the evaluation of the dynamic stability in each island after islanding. This paper provides a framework for preventing wide-area blackouts using wide area measurement systems (WAMS), which consists of three stages to execute a successful islanding strategy. Normally, power system collapses and blackouts occur shortly after a cascading outage stage. Using such circumstances, an adapted single machine equivalent (SIME) method was used online to determine transient stability before blackout was imminent, and was then employed to determine when to island based on transient instability. In addition, SIME was adopted to assess the dynamic stability in each island after islanding, and to confirm that the chosen candidate island cutsets were stable before controlled islanding was undertaken. To decide where to island, all possible islanding cutsets were provided using the power flow (PF) tracing method. SIME helped to find the best candidate islanding cutset with the minimal PF imbalance, which is also a transiently stable islanding strategy. In case no possible island cutset existed, corresponding corrective actions such as load shedding and critical generator tripping, were performed in each formed island. Finally, an IEEE 39-bus power system with 10 units was employed to test this framework for a three-stage controlled islanding strategy to prevent imminent blackouts.

An Improved Hierarchical and Decentralized Control Strategy for Emergency Power Supply During Disaster

Formation Scheme and Decentralized Control of Microgrids Consisting of Mobile Emergency Power Sources During Natural Disasters

Adaptive Control Strategy of Multiemergency Power Supply Network System Connected to New Energy

Analysis Of "8.15" Blackout In Taiwan And The Improvement Method Of Contingency Reserve Capacity Through Direct Load Control

Self-optimizing Droop Control and Quasi-Synchronization Strategy Based on Emergency Power Source

An Improved Droop Control Method for Distributed Diesel Generators Without Intercommunication under the Disaster Condition

A Fully Distributed Hierarchical Control Framework for Coordinated Operation of DERs in Active Distribution Power Networks

Blackout Prevention: Managing Complexity with Technology

RETRACTED: Adaptive Control Strategy of Multiemergency Power Supply Network System Connected to New Energy (Retracted Article)

Design of power grid emergency command system

A Decentralized Self-optimizing Control Strategy for Islanded Microgrid

Emergency Power Supply Management Strategy for Low-Performance Distribution Networks Based on Mobile Multi-Port Interconnection Equipment

Blackout Risk Analysis and Control of Power System Integrated with Wind Farm

Challenges and Opportunities in Emergency Management of Electric Power System Blackout

Modelling, controlling, predicting blackouts

A Three-Stage Procedure for Controlled Islanding to Prevent Wide-Area Blackouts

Real-time Optimisation of Emergency Demand Response and HVDC Power Modulation to Improve Short-Term Frequency Stability of the Receiving-End Power Systems

Cascading Failure and Blackout Risk Analysis of AC/DC Power System - the Impact of AC/DC Interconnection Mode and Capacity Distribution

Research on the Unit Black-Start Strategy Considering Recovery Path and Start Sequence

Optimization and control of cyber–physical power systems under dual-network interactive cascading failure

A control strategy for improving power system resilience in N-k contingency