Abstract:The flow environment in inner cores of water-in-oil-in-water (w/o/w) microfluidic double emulsions has a significant impact on industrial applications of such systems. For example, in the case of shear sensitive cells compartmentalised in the cores, high shear conditions may be deleterious. This study reports on the flow characteristics of w/o/w inner cores in comparison to those in single water-in-oil (w/o) microdroplets of equal size moving in the same microchannel, resolved by means of micro-particle image velocimetry (mu PIV). The multiphase flow system employed in the study had a viscosity ratio,., between aqueous and oil phase of the order of unity (lambda= 0.78) and both single droplets and inner cores of double emulsions filled the channel. This configuration resulted in a weak recirculating flow inside the w/o single droplet: the measured flow field exhibited a uniform low velocity flow field in the central region surrounded by small regions of reversed flow near the channel walls. This flow topology was maintained in the inner cores of w/o/w double emulsions for intermediate capillary numbers (Ca) ranging from 10(-3) to 10(-2), and core morphologies varying from large plugs to pancake cores. The core morphology affected the magnitude and distribution of the velocity in the droplets. The similarity in the flow topology resulted from the fact that inner cores were located at the back of the outer droplet in such a way that inner and outer interfaces were in contact for over half of core surface area and separated only by a thin lubricating film. Both single droplets and inner cores exhibited a narrow shear rate distribution characterised by small regions of maximum shear confined near the channel walls. Shear rate magnitude values were found to be an order of magnitude lower than those in the channel and hence capable of reducing stresses in flow cytometry to far below reported values for cell damage. Hence, it can be concluded that double emulsions are suitable candidates to substitute single droplets in flow cytometry to protect the screened items and are compatible with the commercial flow cytometry systems.

Visualization Study on Solid-Core Encapsulation Behaviors of Double Emulsion in a Flow-Focusing Microchannel

Microencapsulation of Solid Cores to Prepare Double Emulsion Droplets by Microfluidics

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Understanding the microfluidic generation of double emulsion droplets with alginate shell

Microfluidic preparation and structure evolution of double emulsions with two-phase cores

The microenvironment of double emulsions in rectangular microchannels.

Formation and Deformation of Double Emulsions in a Cross-Shaped Microchannel: from Janus to Core–shell Structure

Numerical study of double emulsion generation in a flow-focusing microchannel by multiple-relaxation-time lattice Boltzmann method

Modelling double emulsion formation in planar flow-focusing microchannels

Splitting of Double-Core Solid-in-Water-in-Oil Droplet in a Microfluidic Y-Junction

Visualization Study of Oil-in-Water-in-Oil (O/W/O) Double Emulsion Formation in a Simple and Robust Co-Flowing Microfluidic Device

Thermocapillary Flow‐induced Core Release from Double‐emulsion Droplets in Microchannels

Deformation Of Double Emulsions Under Conditions Of Flow Cytometry Hydrodynamic Focusing

Formation of double emulsion droplets in flow-focusing microchips: a numerical parametric study

Microfluidic Approach for Encapsulation Via Double Emulsions.

Inner circulation flow characteristics of coalescence droplets in microchannel

Reactions in Double Emulsions by Flow-Controlled Coalescence of Encapsulated Drops

Visualization Study of Emulsion Droplet Formation in a Coflowing Microchannel

Beating Poisson stochastic particle encapsulation in flow-focusing microfluidic devices using viscoelastic liquids

Generation and Evolution of Double Emulsions in a Circular Microchannel

Numerical Studies Of Double Emulsions In A Coaxial Flow-Focusing Microfluidic Device