Abstract:High catalytic activity, energy-saving cathodes are desirable for improving the efficiency of the electro-Fenton system. Herein, carbon felt (CF) modified with graphene oxide (GO) and anthraquinone sulfonate (AQS) as a cathode was fabricated. The CF/GO/AQS cathode with excellent catalytic performance for oxygen reduction was further applied in the electro-Fenton process. Surface morphology and structural characteristics of CF/GO/AQS cathode were characterized by scanning electron microscopy (SEM), X-ray spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. Rhodamine B (RhB) was applied as the target pollutant, and the decolorization rate could reach 95% within 1 h using the CF/GO/AQS cathode, which was 2.3 times higher than that of the unmodified cathode. It was attributed to the prominent capacity to accelerate oxygen reduction reaction (ORR) of CF/GO/AQS cathode. The response current of CF/GO/AQS reached −2.48 mA cm−2, which was about six times higher than that of the bare CF cathode. Electron transfer number determined by linear sweep curves on a rotating disk electrode was calculated to be 1.9–2.2, which indicated the catalytic reduction of molecular oxygen by CF/GO/AQS cathode was dominated by a two-electron reaction pathway. Quinones can catalyze the reduction of molecular oxygen to superoxide radicals. Then the formed superoxide radicals combine with protons to produce hydrogen peroxide (H2O2), which provides a new way of H2O2 generation applied in the electro-Fenton system. The TOC removal rate arrived at 89.9%, and corresponding energy consumption was 4.23 kWh kg−1. The catalytic performance of the CF/GO/AQS cathode kept almost stable after six cycles of a repeated experiment. This new CF/GO/AQS cathode can be a promising material applied in the electro-Fenton process for organic pollutant removal.

Scaling Up Floating Air Cathodes for Energy-Efficient H2O2 Generation and Electrochemical Advanced Oxidation Processes

A Three-dimensional Floating Air Cathode with Dual Oxygen Supplies for Energy-efficient Production of Hydrogen Peroxide

Enhanced H2O2 Utilization Efficiency in Fenton-like System for Degradation of Emerging Contaminants: Oxygen Vacancy-Mediated Activation of O2.

Defect Free Rolling Phase Inversion Activated Carbon Air Cathodes for Scale-Up Electrochemical Applications

Efficient electrosynthesis of H 2 O 2 through electrodeposition-modified cathode and side-aeration integration

Sustainable H2O2 production in a floating dual-cathode electro-Fenton system for efficient decontamination of organic pollutants

A Facile Solution to Mature Cathode Modified by Hydrophobic Dimethyl Silicon Oil (DMS) Layer for Electro-Fenton Processes: Water Proof and Enhanced Oxygen Transport

Engineering a concordant microenvironment with air-liquid-solid interface to promote electrochemical H2O2 generation and wastewater purification

Electro-Fenton process with scalable modified carbonaceous electrode material processed by direct calcination for refractory organic pollutant degradation

Efficient hydrogen peroxide electrosynthesis using anthraquinone covalently bonded CNT on superhydrophobic air breathing cathode

High-efficiency electro-Fenton process based on in-situ grown CoFeCe-LDH@CFs free-standing cathodes: Correlation of cerium and oxygen vacancies with H 2 O 2

Amplifying anti-flooding electrode to fabricate modular electro-fenton system for degradation of antiviral drug lamivudine in wastewater

Integrated and Superaerophilic Ni-O-C Electrode enables Fast and Stable Electrochemical H2O2 Production for Electro-Fenton-like Process

A novel dual gas diffusion electrodes system for efficient hydrogen peroxide generation used in electro-Fenton

Boosting the oxidative capacity of the Fe(0)/O 2 system via an air-breathing cathode

Fast and Stable Electrochemical Production of H 2 O 2 by Electrode Architecture Engineering

Enhancement of oxygen reduction on a newly fabricated cathode and its application in the electro-Fenton process

Activated carbon filled in a microporous titanium-foam air diffusion electrode for boosting H2O2 accumulation

Designing a Self-Breathing Electrode Modulated by Spatial Hydrophobic Microenvironments with Stabilized H2O2 Generation for Wastewater Treatment

Dynamically Adaptive Bubbling for Upgrading Oxygen Evolution Reaction Using Lamellar Fern-Like Alloy Aerogel Self-Standing Electrodes.

A triple-cathode electron-Fenton system for efficient Fe2+ regeneration and in-situ H2O2 electro-activation