Abstract:Porous Al2TiO5 ceramics have drawn increasing attention in diverse applications owing to their low thermal expansion coefficient, and good resistance to thermal shock; however, Al2TiO5 ceramics prepared in previous studies still exhibited a relatively high density, which limited their further application in the field of high-temperature thermal insulation. Herein, we reported the successful fabrication of hierarchically porous Al2TiO5 ceramics with a unique three-dimensional skeleton structure formed by overlapped ceramic nanofibers. Results show that the introduction of SiO2 into Al2TiO5 nanofibers could significantly improve their thermal stability and meanwhile reduce their formation temperature. Al2TiO5 nanofibers with 10 mol% SiO2 exhibited a superior microstructure and excellent thermal stability, and were selected as the raw material in the subsequent preparation of corresponding porous ceramics. Porous Al2TiO5 ceramics prepared by the freeze-gel casting exhibited a unique hierarchical pore structure with large pores originating from the sublimation of ice crystal and small pores formed by the overlapped of fibers. This unique microstructure endowed porous ceramics with an ultra-high porosity (97.59–95.59%), ultra-low thermal conductivity (0.0456–0.0754 W m−1 K−1) and excellent thermal stability. Owing to these outstanding characteristics, the resulting porous Al2TiO5 ceramics are expected to be employed as the high-temperature thermal insulation material in a wide spectrum of advanced applications.

Preparation of Hierarchical Porous Al2TiO5–mullite Ceramics by Biological Foaming and Its Microstructural Characterization

Factors affecting the microstructure of a fine ceramic foam

Highly Porous and Hierarchical MgAl2O4 Ceramics with Improved Pore Connectivity Prepared from Gelled Particle-Stabilized Foams

Hierarchically porous Al2TiO5 ceramics via freeze-gel casting

Foam-gelcasting preparation and properties of high-strength mullite porous ceramics

Preparation and Characterization of Mullite Foam Ceramics with Porous Struts from White Clay and Industrial Alumina

Al2O3 Ceramics with Well-Oriented and Hexagonally Ordered Pores: the Formation of Microstructures and the Control of Properties

Fabrication, microstructure and physico-mechanical properties of highly porous acicular mullite ceramic foams by freeze casting method

From Bulk to Porous Structures: Tailoring Monoclinic SrAl2Si2O8 Ceramic by Geopolymer Precursor Technique

Fabrication and Properties of Porous Mullite Ceramics from Directly Sintering Ceramic Microspheres

The controllable microstructure of porous Al2O3 ceramics prepared via a novel freeze casting route

Microstructure and mechanical and thermal shock properties of hierarchically porous ceramics

The Fabrication of Porous Mullite Ceramics Based on the Different Sizes of Aluminum Hydroxide

Highly Porous and Mechanically Robust Al2O3-based Foams with Self-Wrinkled and Rough Aperture Surfaces Via Binary Colloidal Self-Assembly of Nanoparticle/gelation Network

A new mullite foamed ceramic prepared by direct-foaming methods in parallel with a mechanical activation technique

Fabrication of Porous Mullite Ceramics with High Porosity Using Foam-Gelcasting

Fabrication of Porous Al2TiO5-Al2O3 Ceramics Using Al2O3 Hollow Spheres Coated with TiO2 Sol

Fabrication of Mullite-Corundum Foamed Ceramics for Thermal Insulation and Effect of Micro-Pore-foaming Agent on Their Properties

Pore Architectures and Mechanical Properties of Porous α-SiAlON Ceramics Fabricated via Unidirectional Freeze Casting Based on Camphene-Templating

Microstructure and properties of highly porous mullite materials fabricated by direct foaming-gelcasting

Ultrastrong Hierarchical Porous Materials Via Colloidal Assembly and Oxidation of Metal Particles