Abstract:Purpose The purpose of this paper aims to design a robust wind turbine emulator (WTE) based on a three-phase induction motor (3PIM). Design/methodology/approach The 3PIM is driven by a soft voltage source inverter (VSI) controlled by a specific space vector modulation. By adjusting the appropriate vector sequence selection, the desired VSI output voltage allows a real wind turbine speed emulation in the laboratory, taking into account the wind profile, static and dynamic behaviors and parametric variations for theoretical and then experimental analysis. A Mexican hat profile and a sinusoidal profile are therefore used as the wind speed system input to highlight the electrical, mechanical and electromagnetic system response. Findings The simulation results, based on relative error data, show that the proposed reactive power control method effectively estimates the flux and the rotor time constant, thus ensuring an accurate trajectory tracking of the wind speed for the wind emulation application. Originality/value The proposed architecture achieves its results through the use of mathematical theory and WTE topology combine with an online adaptive estimator and Lyapunov stability adaptation control methods. These approaches are particularly relevant for low-cost or low-power alternative current (AC) motor drives in the field of renewable energy emulation. It has the advantage of eliminating the need for expensive and unreliable position transducers, thereby increasing the emulator drive life. A comparative analysis was also carried out to highlight the online adaptive estimator fast response time and accuracy.

Mission Profile Emulator for Permanent Magnet Synchronous Machine in Voltage-Response Mode Based on Three-phase Power Electronic Converter

Efficiency Optimization of PMSM Drives Using Field-Circuit Coupled FEM for EV/HEV Applications

Field-circuit Coupled Design and Analysis for Permanent Magnet Synchronous Motor System Used in Electric Vehicles

Power Electronics Based Permanent Magnet Synchronous Machine Emulation Methods Research

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

Optimization Design of an Interior Permanent-Magnet Synchronous Machine for a Hybrid Hydraulic Excavator

Permanent Magnet Synchronous Machine Emulation Based on Power Hardware-in-The-Loop Simulation

Investigation of Permanent Magnet Synchronous Motor System Used in Electric Vehicles Based on Space Vector Modulation

Preparation Analysis of the Overall Characteristics for High Power PMSM with Multi Phase Units

Power Electronic Load System for Motor Drivers Testing Considering Motor Faulty Status Simulation

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Comparison of PMSMs with Different Rotor Structures for EV Application

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

Wind turbine emulator using three-phase IM controlled through an adaptive reactive power estimator fed by soft-VSI topology

Multiobjective Optimization of the PMSM With the Same Number of Poles and Slots Considering Dynamic Response and Torque Performance

Validation of EMR simulation platform of a permanent magnet synchronous machine used for electric propulsion

Simulation of Permanent Magnet Synchronous Motor Based on Dual PWM

A Phase-Domain Model of Dual Three-Phase Segmented Powered Linear PMSM for Hardware-assisted Real-Time Simulation

Analysis of Parameter Matching on the Steady-State Characteristics of Permanent Magnet-Assisted Synchronous Reluctance Motors under Vector Control

A novel hybrid seven-level converter for permanent magnet synchronous motor driving system based on model predictive control

Integrated Design Method of PMSM in Electric Drive System of Electric Vehicle