Abstract:ORCs (Organic Rankine Cycles) are of great significance for energy conservation and CO2 emission reductions owing to their usage in converting low grade waste heat to electrical power. The working fluid properties are the key to getting good cycle performance. The advantages of CO2 and hydrocarbon working fluids for use in ORCs are investigated here for six binary mixtures: CO2+propane/n-butane/iso-butane/n-pentane/iso-pentane/neo-pentane. A transcritical ORC simulation program was used to predict the cycle performance for various hydrocarbon mass fraction working fluids for a turbine inlet temperature of 453.15 K and inlet pressure of 1.3pc. The predicted cycle performance is used to divide the six working fluids into three categories relative to the thermal efficiency of an ORC using pure CO2. The first working fluid type (CO2+propane) has increasing efficiencies with increasing hydrocarbon mass fraction while the second type have maximum thermal efficiencies at hydrocarbon mass fractions of 0.3, and the third type has maximums at a mass fraction of 0.2. In addition, the thermodynamics relative efficiency, ξ, is highest for CO2+propane and then decreases for CO2+iso-butane, CO2+ n-butane, CO2+neo-pentane, CO2+iso-pentane, and CO2+n-pentane with the lowest. Then, the cycle efficiencies of the three working fluid types were analyzed from the perspective of the hydrocarbon molecular structure. The results show that longer main carbon chains and branched carbon chains have larger pc and Tc, with this critical property leading to higher efficiencies at low hydrocarbon mass fractions. Lower p′c and T′c lead to higher efficiencies at high hydrocarbon concentrations. Thus, there is a trade-off between the cycle efficiency and the hydrocarbon mass fraction. Finally, the three best working fluid mixtures, 0.3CO2/0.7propane, 0.7CO2/0.3neo-pentane and 0.8CO2/0.2pentane, were further analyzed according to their cycle characteristics. The 0.3CO2/0.7propane mixture working fluid had the best cycle efficiency for these conditions.

Experimental Investigation of Lubricant Oil on a 3 Kw Organic Rankine Cycle (ORC) Using R123

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Thermoeconomic Optimization Design of the ORC System Installed on a Light-Duty Vehicle for Waste Heat Recovery from Exhaust Heat

Energy, Exergy, Economic Performance Investigation and Multi-Objective Optimization of Reversible Heat Pump-Organic Rankine Cycle Integrating with Thermal Energy Storage

Investigation of Organic Rankine Cycle Integrated with Double Latent Thermal Energy Storage for Engine Waste Heat Recovery

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Comparison study of Trilateral Rankine Cycle, Organic Flash Cycle and basic Organic Rankine Cycle for low grade heat recovery

Investigation of an Innovative Cascade Cycle Combining a Trilateral Cycle and an Organic Rankine Cycle (TLC-ORC) for Industry or Transport Application

Experimental and simulation study on a zeotropic ORC system using R1234ze(E)/R245fa as working fluid

Experimental study on the performance of a great progress 10 kW organic Rankine cycle for low-grade heat source based on scroll-type expander

Exploration and Analysis of CO2 + Hydrocarbons Mixtures As Working Fluids for Trans-critical ORC

An examination of super dry working fluids used in regenerative organic Rankine cycles

Experimental investigation on organic Rankine flash cycle with high- and low-stage scroll-expanders for thermal power generation

Thermodynamic analyses and experimental investigations on the net efficiency of a small‐scale organic Rankine cycle prototype

Experimental study of the external load characteristics on a micro-scale organic Rankine cycle system

Non-steady thermodynamic characteristics of a pilot-scale organic Rankine cycle system with a thermally-driven pump

Analysis of the Thermodynamic Performance Limits of the Organic Rankine Cycle in Low and Medium Temperature Heat Source Applications

Energetic and Exergetic Investigation of an Organic Rankine Cycle at Different Heat Source Temperatures

Design And Testing Of A 340 Kw Organic Rankine Cycle System For Low Pressure Saturated Steam Heat Source

Thermodynamic Analysis and Optimization of Organic Rankine Cycles Based on Radial-Inflow Turbine Design