Abstract:Ultrasonic waves can be used to transfer power and data to low power electronic devices placed in inaccessible locations such as the human body, deep in the ocean, or in metallic enclosures. The upstream communication from the device can be transmitted using a minimal power by modulating the impedance of a piezoelectric transducer to switch between absorbing incident ultrasonic waves and completely reflecting it. The absorbed ultrasonic power in this configuration is supplied to an energy harvesting circuit for powering the device. Piezoelectric transducers are commonly optimized either for power applications only (narrow bandwidth and high sensitivity) or data applications only (broadband and low sensitivity). This work explores piezoelectric transducer design for simultaneous power and data transfer using acoustic and electrical impedance matching. A broadband transducer is designed to receive uninterrupted ultrasonic power at 1.3 MHz while transmitting upstream data at a different frequency band with a bandwidth of 300 kHz. The factors affecting power/signal reflection due to impedance mismatch are analyzed analytically, and an approach for simultaneous acoustic and electrical impedance matching is introduced to maximize the bandwidth and sensitivity. Several air-backed underwater transducers with different matching layers are fabricated, and their electrical and acoustic reflection as well as their electrical impedance are experimentally measured and compared to analytical predictions. A circuit for maximizing the bandwidth and sensitivity of the transducer for data transfer is then tested experimentally. Another circuit for achieving uninterrupted simultaneous power and data transfer using a single transducer is also implemented and tested.

Ultrasonic Communication System Design Using Electromagnetic Acoustic Transducer

Poster: Inaudible High-throughput Communication Through Acoustic Signals

Ultracomm: High-Speed And Inaudible Acoustic Communication

Design and Implementation of a High-Speed Sonar Data Transmission System

An Optimal Design Method for Improving the Efficiency of Ultrasonic Wireless Power Transmission during Communication

Software Defined Ultrasonic System for Communication Through Solid Structures

High data rate ultrasonic communications

Ultrasonic Energy and Data Transfer through a Metal—Liquid Multi-Layer Channel Enhanced by Automatic Gain and Carrier Control

Ultrasonic Wireless Communication Through Metal Barriers

Direct Acoustic Communication Between Underwater and Airborne Nodes

A Wideband MIMO Underwater Acoustic Communication Experimental System

Long-Range EM Communication Underwater With Ultracompact ELF Magneto-Mechanical Antenna

A Lamb Waves Based Ultrasonic System for the Simultaneous Data Communication, Defect Inspection, and Power Transmission

The nature of soil organic matter affects sorption of pesticides. 1. Relationships with carbon chemistry as determined by 13C CPMAS NMR spectroscopy.

Cross-Medium Communication Combining Infrared Optical and Acoustic Waves

Time Reversal Signal Processing for Ultrasonic Communication through Metal Channels

Asynchronous Amplify-and-forward Relay Communications for Underwater Acoustic Networks.

Design of surface wave electromagnetic acoustic transtucers

Exploiting Spatial Degrees of Freedom for High Data Rate Ultrasound Communication with Implantable Devices

Research on Information Transmission Technology Through the Water–Air Interface Combining a Sonar and a Radar

Piezoelectric transducer design and impedance tuning for concurrent ultrasonic power and data transfer