Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. A detailed computational study was carried out to explore how the presence of a cavity and cavity angles influence the performance and combustion mechanisms within a scramjet combustor. This research utilized ANSYS Fluent 2021 to create hexahedral meshes and simulate the complex fluid dynamics in scramjet engines equipped with dual strut injectors. The simulations addressed various critical aspects of fluid mechanics, including the continuity, momentum (via the Navier-Stokes equations), and energy equations. These equations were used to model non-reacting flows, while the species transport equations were applied to analyse reacting flows. The turbulence within the combustor was modelled using the standard K-ε model, a common choice for such high-speed aerodynamic evaluations. The study's primary goal was to assess the effects of different geometrical configurations of cavity flame holders on the performance characteristics of an H2-based scramjet combustor overall efficiency, focusing on mixing efficiency, combustion performance, and total pressure loss. Both configurations with and without a cavity were examined. Key findings indicate that incorporating a cavity into the combustor design leads to developing a robust recirculation zone within the cavity area. This recirculation zone is pivotal in enhancing fuel-air mixing and combustion efficiency, with cavity-based combustors showing an earlier onset of combustion and achieving peak combustion efficiencies around 90–95%. The extent of the recirculation region is notably influenced by the proximity of the strut injector to the cavity's length. Additionally, the presence of a shear layer within the cavity generates a weak shock at the cavity's trailing edge. This shock interaction can adversely affect scramjet combustor performance, especially at higher cavity angles (α) and specific geometric configurations, such as an L/D ratio of 4 and α=30°. The L/D ratio of 4 and α=30° combustor model results in a 13.8% increase in turbulence intensity, which raises air-fuel mixing and there by improves mixing and combustion efficiency by 14.23% and 13.34%, compared to the other depth of the cavities. This advantage is critical, especially considering the compact length of the combustor, which is a desirable attribute in scramjet design.

Characteristics of a Cavity-Stabilized Hydrogen Jet Flame in a Model Scramjet Combustor

Large eddy simulation of a dual-mode scramjet with direct injection: Flame dynamics under flow separation induced by heat-release

Flame Stabilization and Local Combustion Modes in a Cavity-Based Scramjet Using Different Fuel Injection Schemes

Investigation of multi-scale flow structures and combustion characteristics in a cavity-enhanced circular scramjet

Investigation of combustion characteristics in a hydrogen-fueled scramjet combustor

Numerical study of periodic flame flashback in a cavity-based scramjet combustor

Large eddy simulation of hydrogen/air co-flow jet flame in the strut-based supersonic combustor

Numerical Simulation of Shock-Induced-Combustion in Three-Dimensional HyShot Scramjet Model

Flame characteristics of a cavity-based scramjet combustor using OH-PLIF and feature extraction

On jet-wake flame stabilization in scramjet: A LES/RANS study from chemical kinetic and fluid-dynamical perspectives

Experimental study on the flame stabilization mode in the rear-wall-expansion cavity

Direct numerical simulation of supersonic internal flow in a model scramjet combustor under a non-reactive condition

Investigation on combustion mode and heat release in a model scramjet engine affected by shocks

Chemical Kinetics and Self-Ignition in a Model Supersonic Hydrogen-Air Combustor

Numerical investigation on influence of different geometrical cavity flame holders and flame stabilization mechanism in hydrogen fueled multi-strut-based scramjet combustor

Numerical study on the mixing and combustion characteristics of a liquid kerosene jet in a scramjet combustor

Experimental investigation of mode transition process in a cavity-based scramjet

Large eddy simulation of flame and thermal-acoustic characteristic in a strut-based scramjet with dynamic thickened flame model

Partially premixed flamelet modeling in a hydrogen-fueled supersonic combustor

Vortex Dynamics in Different Combustion Regions of a Cavity-Based Scramjet

Impact of Fuel Injection Distribution on Flame Holding in a Cavity-Stabilized Scramjet