Abstract:Lithium (Li) metal is a promising candidate for next-generation anode materials with high energy densities. However, Li dissolution/deposition processes are limited at the upper surface in contact with the electrolyte, which brings a locally high current density and then results in dendritic Li growth. This restraint of the local surface reaction during cycling has not been solved by commonly used modification strategies. In this study, a three-dimensional (3D) Li+ conductive skeleton is activated from atomic layer deposition (ALD) coating Li3PO4 (LPO) on the surface of the Ni foam (LPNF). Then, the skeleton is efficiently constructed in the Li metal anode by the lower-temperature Li infusion. Ionic conductor LPO layers and electronic conductor Ni fibers supply charge transport channels between the electrolyte and the internal Li. The mixed conductive network realizes holistic charge transfer, which is proved by in situ scanning electron microscopy experiments. In virtue of dispersive dissolution/deposition and optimized electrochemical kinetics brought by a Li+ conductive network, the composited Li electrode presents an excellent symmetric battery cycling stability (over 1200 h) and enhanced rate performances (stable cycling even at 10.0 mA cm-2). When matching with a LiCoO2 (LCO) cathode, LCO||Li@LPNF full batteries exhibit a capacity retention of 80.8% over 250 cycles. During cycling, there was no evidence of dendrite growth and the remaining Li in the composited anode showed a smooth, compact, and well-combined condition with LPNF. Through constructing a 3D Li+ conductive network, the composited Li metal anode breaks through the limit of the local surface reaction; this work proposes a novel insight of realizing holistic charging/discharging for the dendrite-free Li metal anode.

Surface Modification Via a Nanosized Nitride Material to Stabilize Lithium Metal Anode

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

Li metal coated with Li3PO4 film via atomic layer deposition as battery anode

Realizing Holistic Charging–Discharging for Dendrite-Free Lithium Metal Anodes Via Constructing Three-Dimensional Li+ Conductive Networks

Achieving homogeneous Li deposition of 3D dendrite-free lithium metal anode through atomic layer deposition surface modification

Surface Modification of Ni Foam for Stable and Dendrite-Free Lithium Deposition

Highly Reversible Lithium Metal Anodes Enabled by a Lithium Sulfamate Layer with High Ionic Conductivity and a Low Surface Diffusion Barrier

A facile surface chemistry route to a stabilized lithium metal anode

Stable Lithium Metal Anode Enabled by a Lithiophilic and Electron/Ion Conductive Framework

A lithiophilic and conductive interlayer for dendrite-free lithium metal anodes

Multifunctional interfacial and structural anode for dendrite-free lithium metal-based batteries

An Artificial Protective Coating toward Dendrite‐Free Lithium‐Metal Anodes for Lithium–Sulfur Batteries

Coupling a Three-Dimensional Nanopillar and Robust Film to Guide Li-Ion Flux for Dendrite-Free Lithium Metal Anodes

Interfacial Modification of Lithium Metal Anode by Boron Nitride Nanosheets.

Constructing a Phosphating–Nitriding Interface for Practically Used Lithium Metal Anode

Bimetallic composite induced ultra-stable solid electrolyte interphase for dendrite-free lithium metal anode

Reversing the Dendrite Growth Direction and Eliminating the Concentration Polarization Via an Internal Electric Field for Stable Lithium Metal Anodes

Regulating the Li Nucleation/Growth Behavior via Cu 2 O Nanowire Array and Artificial Solid Electrolyte Interphase toward Highly Stable Li Metal Anode

Stable lithium metal anode enabled by lithium metal partial alloying

Stabilizing Lithium Metal Anode by Molecular Beam Epitaxy Grown Uniform and Ultrathin Bismuth Film

Long-term stable Li metal anode enabled by strengthened and protected lithiophilic LiZn alloys