Abstract:Connected and Automated Truck Platoon (CATP) refers to a group of trucks traveling closely together with minimal spacing to improve fuel economy and safety. However, challenges arise from instability due to internal platoon factors and external traffic disturbances. This research presents an improved Cooperative Adaptive Cruise Control (CACC) model tailored for CATP to address these challenges. The model is designed to enhance safety, fuel efficiency, and traffic efficacy. The improvements of the proposed model are in two aspects: the optimizing of the time headway strategy and the dynamic parameter adjustments of controller based on multi-objectives. The Dynamic Safety Requirement Time Headway (DSRTH) strategy facilitates the timely detection of the accelerations of the leading vehicles within the platoon, enabling quick driving responses. Additionally, Model Predictive Control (MPC) enables dynamic calibration of Proportional-Derivative (PD) control parameters and issuance of velocity commands. Meanwhile, the integration of a second-order time-delay response model has been implemented to adapt to dynamic changes in commands. A transfer function has been established, and stability has been proven. To evaluate the model performance, simulation analysis was performed using real vehicle trajectories as the CATP following vehicles. The results indicate that the DSRTH strategy outperforms both the Constant Time Headway (CTH) and Variable Time Headway (VTH) strategies, allowing rear vehicles to reach the speed trough earlier, with response speeds improved by 3.1% and 1.5%, respectively. Compared to the Intelligent Driver Model (IDM) and CACC models, the improved CACC model achieves a steady state of constant acceleration sooner, with recovery times reduced by 17.7% and 3.2%. Additionally, compared to the IDM model, the improved CACC model can save 3.23% in fuel consumption. Furthermore, sensitivity analysis indicates that as the CATP proportion and platoon size increase, there is a positive impact on traffic flow. However, when the platoon size exceeds 5 vehicles, it shows a negative impact on the stability of other vehicles in the traffic flow besides those in the CATP.

An Improved OPAX Method Based on Moving Multi-Band Model

An accurate and reliable operational transfer path analysis for transfer path contribution evaluation based on landweber iterative method

AR model-based crosstalk cancellation method for operational transfer path analysis

Tikhonov Regularization-Based Operational Transfer Path Analysis

Maximum Torque Per Ampere Control of IPMSM Based on Online Parameter Identification Considering Cross-coupling and Saturation Effects

Transfer Path Analysis and Contribution Evaluation Using SVD- and PCA-Based Operational Transfer Path Analysis

Modal analysis of drive axle based on OMA time domain method identification

Path Tracking Control of High-Speed Intelligent Vehicles Considering Model Mismatch

A customized scheme of crosstalk cancellation for operational transfer path analysis and experimental validation

Damped SVD for Operational Transfer Path Analysis

Multi-objective Optimization for Connected and Automated Truck Platoon Control with Improved CACC Model

Research on Optimized Torque-Distribution Control Method for Front/Rear Axle Electric Wheel Loader

Adaptive event-based robust passive fault tolerant control for nonlinear lateral stability of autonomous electric vehicles with asynchronous constraints

An online payload identification method based on parameter difference for industrial robots

Estimation of Longitudinal Force, Sideslip Angle and Yaw Rate for Four-Wheel Independent Actuated Autonomous Vehicles Based on PWA Tire Model

A modeling method for the opto-mechanical coupling problems of photoelectric detection and tracking systems in dynamics process

Operational transfer path analysis for the fixed shaft gear transmission system based on the simulation and experiment

An Algorithm to Estimate OD Matrix with Probe Vehicle and Its Reliability Analysis

Vertical Tire Forces Estimation of Multi-Axle Trucks Based on an Adaptive Treble Extend Kalman Filter

Improved Robust Multiple Model Adaptive Control of the Two-Cart Mass-Spring-Damper System with Uncertainties

Fully Automated Operational Modal Identification Based on Scale-Space Peak Picking Algorithm and Power Spectral Density Estimation