Abstract:Grayscale camera can only obtain gray scale image of object, while the multicolor imaging technology can obtain the color information to distinguish the sample structures which have the same shapes but in different colors. In fluorescence microscopy, the current method of multicolor imaging are flawed. Problem of these method is affecting the efficiency of fluorescence imaging, reducing the sampling rate of CCD etc. In this paper, we propose a novel multiple color fluorescence microscopy imaging method which based on the Frequency division multiplexing (FDM) technology, by modulating the excitation lights and demodulating the fluorescence signal in frequency domain. This method uses periodic functions with different frequency to modulate amplitude of each excitation lights, and then combine these beams for illumination in a fluorescence microscopy imaging system. The imaging system will detect a multicolor fluorescence image by a grayscale camera. During the data processing, the signal obtained by each pixel of the camera will be processed with discrete Fourier transform, decomposed by color in the frequency domain and then used inverse discrete Fourier transform. After using this process for signals from all of the pixels, monochrome images of each color on the image plane can be obtained and multicolor image is also acquired. Based on this method, this paper has constructed and set up a two-color fluorescence microscope system with two excitation wavelengths of 488 nm and 639 nm. By using this system to observe the linearly movement of two kinds of fluorescent microspheres, after the data processing, we obtain a two-color fluorescence dynamic video which is consistent with the original image. This experiment shows that the dynamic phenomenon of multicolor fluorescent biological samples can be generally observed by this method. Compared with the current methods, this method can obtain the image signals of each color at the same time, and the color video's frame rate is consistent with the frame rate of the camera. The optical system is simpler and does not need extra color separation element. In addition, this method has a good filtering effect on the ambient light or other light signals which are not affected by the modulation process.

“Synergy effect” and its application in LED-multispectral imaging for improving image quality

A High-Efficiency Acquisition Method of LED Multispectral Images Using Gray Code Based Square Wave Frequency Division Modulation

Improvement of Underwater Color Discriminative Ability by Multispectral Imaging

Portable Multi-Spectral Lens-Less Microscope with Wavelength-Self-calibrating Imaging Sensor

Color Router-based Long-wave Infrared Multispectral Imaging

Multispectral Imaging Based on a Multichannel LED System and RGB Camera

Multi-Spectral and Panchromatic Image Fusion Based on His-Wavelet Transform and Mopso Algorithm

Multispectral Microimaging System with Narrowband LED Illumination

[Study on Application of Multi-Wavelength LED Array Induced Fluorescence Spectrum in Multicomponent Analysis].

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

Efficient single-pixel multispectral imaging via non-mechanical spatio-spectral modulation

Spectral Design Method to Simulate Tunable Spectra of Various Light Sources Based on Multi-Channel LEDs

Design and Realization of 3D-EEM System Based on Multi-wavelength LED Array as Exciting Light Source

Multispectral single pixel imaging based on spatial and spectral dimension decoupling

Design of Optocoupler for Synthesizing Four Color Spectra

Frequency Division Multiplexed Multi-Color Fluorescence Microscope System

Optimization of Illumination Performance of Trichromatic White Light-Emitting Diode and Characterization of Its Modulation Bandwidth for Communication Applications

Super Resolution Microscope Imaging Based on Three Channels

Single-shot multispectral imaging with a monochromatic camera

Wavelength Dependence of Colorimetric Properties of Lighting Sources Based on Multi-Color LEDs

Dual-LED-based multichannel microscopy for whole-slide multiplane, multispectral, and phase imaging