Optimal Design of Planar Spiral Coil for Uniform Magnetic Field to Wirelessly Power Position-Free Targets
Qi Xu,Quankun Hu,Hao Wang,Zhi-Hong Mao,Mingui Sun
DOI: https://doi.org/10.1109/tmag.2020.3042131
IF: 1.848
2021-02-01
IEEE Transactions on Magnetics
Abstract:A large circular transmitter (power pad) is often utilized for inductively wireless charging so that the power receiver can position itself freely within the power pad. However, the uneven magnetic field distribution leads to the impedance mismatch and the variable transferred power due to the misalignment between a receiving coil and a relatively large transmitter coil. In this paper, the effects of the turn numbers, trace spacing, and coil size on the uniformity of magnetic field distribution over a planar spiral coil (PSC) are investigated based on an analytical model. Then, the genetic algorithm is used to optimize the trace width and spacing of a ten-turn PSC with the fixed outer and inner diameters, whereas the magnetic field is numerically calculated by HFSS software. The geometrically optimal PSC is obtained with the trace width approximately equal to trace spacing for each turn by minimizing the coefficient of variation (COV) of magnetic field within an effective charging area over the coil. The results showed that the simulated and measured COVs of magnetic field were 0.130 and 0.121, respectively, which are obviously less than that of the uniformly spaced regular coil and show a little less than that of the optimally spaced coil with fixed trace width. Therefore, the trace spacing is a major consideration to achieve the uniform magnetic field, whereas the trace width variation is applied to refine the evenness of field. It is also expected that the proposed GA-based optimization is well applied to design other Txs with conformable shape in inductively WPT systems for stable power delivery regardless of the receiver positions.
engineering, electrical & electronic,physics, applied