Abstract:Melt-spun Al 75− X Si 25 Ni X ( X = 2, 4, 7, and 10 mol%) alloys were investigated as anode materials for lithium-ion batteries. The Al 68 Si 25 Ni 7 anode showed a maximum capacity of 840 mA h g −1 at the fifth cycle and maintained 661 mA h g −1 after 40 cycles with a high coulumbic efficiency of 93%. The specific capacity increased as the decrease in the Ni content during the first 20 cycles, but the cycle performance became poorer. For the Al 65 Si 25 Ni 10 anode, the specific capacity increased slowly as the cycles increased and reached 370 mA h g −1 after 40 cycles. When the Al 68 Si 25 Ni 7 ribbons were annealed, their initial capacity became higher, but much poorer cycle performance and low coulumbic efficiency occurred. Except Al 65 Si 25 Ni 10, the AlLi compound could be detected in the anodes after lithiation. However, the capacity faded rapidly due to the formation of excessive AlLi in the Al 73 Si 25 Ni 2 and annealed Al 68 Si 25 Ni 7 anodes. The experiments revealed that the as-quenched ribbons consisted of the nanoscaled α-Al, metallic glass and α-Si, and their fractions were dependent on the Ni content. The α-Al was a supersaturated solid solution of Si and Ni in fcc-Al. For the as-quenched Al 68 Si 25 Ni 7 ribbons, the α-Al grains were embedded in the amorphous matrix. It can be understood that metallic glass can store Li, and the supersaturated solid solution can store Li even more easily compared with other known Al–Si-based alloys. A conclusion can be drawn that the microstructure that the nanoscaled α-Al embedded in the metallic glass matrix is beneficial to improve the structure stability, restrain serious structural evolution, and limit the volume variation and pulverization during electrochemical cycles.

An Investigation of the Fe-Mn-Si System for Li-Ion Battery Negative Electrodes

Electrochemical Performance Of Si-Mn Composites In Li-Ion Battery

Si(CO) y Negative Electrodes for Li-Ion Batteries

The Investigation of BaFeSi/C Alloy Composite As Anode Materials for Li-ion Battery

Electrochemical reaction of the SiMn/C composite for anode in lithium ion batteries

Cu–Al–Si alloy anode material with enhanced electrochemical properties for lithium ion batteries

Effects of the phase constitution and microstructure on the electrochemical properties of melt-spun Al88−X Si12Mn X anode materials for lithium-ion batteries

Single-Crystal Intermetallic M-Sn (M = Fe, Cu, Co, Ni) Nanospheres As Negative Electrodes for Lithium-Ion Batteries

Studies on Si-based anodes for lithium ion batteries

Role of silicon and carbon on the structural and electrochemical properties of Si-Ni$_{3.4}$Sn$_4$-Al-C anodes for Li-ion batteries

The Electrochemical Properties of Melt-Spun Al–Si–Cu Alloys

Effects of the phase constitution and microstructure on the electrochemical properties of melt-spun Al 882XSi 12MnX anode materials for lithium-ion batteries

Mechanochemical Synthesis of Fe–Si-Based Anode Materials for High-Energy Lithium Ion Full-Cells

Role of silicon as structural stabilizer and redox-active element in multicomponent (Sn, Sb, Fe, Si) alloy electrodes for Na-ion batteries

Si 85 Fe 15 O x Alloy Anode Materials with High Thermal Stability for Lithium Ion Batteries

Effects of the phase constitution and microstructure on the electrochemical properties of melt-spun AlSiMn anode materials for lithium-ion batteries

Si-Mn Composite Anode Used for Li-ion Battery

Li-Rich Li-Si Alloy As A Lithium-Containing Negative Electrode Material Towards High Energy Lithium-Ion Batteries

Electrochemical properties of Si-Mn/C as anode materials for lithium ion batteries

Truth and mechanism of high safety and long durability in Fe-rich lithium ferromanganese silicate (LFMS) cathode-based Li-ion batteries: A first principles and experiment study

The electrochemical properties of Al–Si–Ni alloys composed of nanocrystal and metallic glass for lithium-ion battery anodes