Abstract:Passive negative stiffness dampers (NSDs) that possess superior energy dissipation abilities, have been proved to be more efficient than commonly adopted passive viscous dampers in controlling stay cable vibrations. Recently, inertial mass dampers (IMDs) have attracted extensive attentions since their properties are similar to NSDs. It has been theoretically predicted that superior supplemental damping can be generated for a taut cable with an AVID. This paper aims to theoretically investigate the impact of the cable sag on the efficiency of an AVID in controlling stay cable vibrations, and experimentally validate superior vibration mitigation performance of the AVID. Both the numerical and asymptotic solutions were obtained for an inclined sag cable with an AVID installed close to the cable end. Based on the asymptotic solution, the cable attainable maximum modal damping ratio and the corresponding optimal damping coefficient of the AVID were derived for a given inertial mass. An electromagnetic AVID (EIMD) with adjustable inertial mass was developed to investigate the effects of inertial mass and cable sag on the vibration mitigation performance of two model cables with different sags through series of first modal free vibration tests. The results show that the sag generally reduces the attainable first modal damping ratio of the cable with a passive viscous damper, while tends to increase the cable maximum attainable modal damping ratio provided by the AVID. The cable sag also decreases the optimum damping coefficient of the AVID when the inertial mass is less than its optimal value. The theoretically predicted first modal damping ratio of the cable with an AVID, taking into account the sag generally, agrees well with that identified from experimental results, while it will be significantly overestimated with a taut-cable model, especially for the cable with large sag.

Inertial Mass Damper for Vibration Control of Cable with Sag

Impact of Cable Sag on the Efficiency of an Inertial Mass Damper in Controlling Stay Cable Vibrations

Inertial Mass Damper for Mitigating Cable Vibration

Refined Study on Free Vibration of a Cable with an Inertial Mass Damper

Vibration Mitigation of Sagged Cables Using a Viscous Inertial Mass Damper: an Experimental Investigation

Design Formulas for Vibration Control of Taut Cables Using Passive MR Dampers

Inerter Dampers with Linear Hysteretic Damping for Cable Vibration Control

Maximum modal damping of cable space vibration control with viscous damper in cable-stayed bridge

Vibration Mitigation of Stay Cables Using Electromagnetic Inertial Mass Dampers: Full-scale Experiment and Analysis

Damping and tuning of inerter-based dampers for cable vibration mitigation considering girder vibrations

Dynamic behavior and damping enhancement of cable with negative stiffness inerter damper

Optimal design of a viscous inertial mass damper for a taut cable by the fixed-points method

Analytical study on the effects of flexural rigidity and negative stiffness in the optimal tuning of inerter-based damper for cable vibration mitigation

Free vibration of a taut cable with internal high damping rubber dampers and an external negative stiffness damper

Passive Control for Parametric Vibration of Cables Using Viscous Fluid Dampers

Multimode Damping Enhancement for Cable Vibration Control: Theoretical and Technological Developments with Applications

Experimental Study on Passive Negative Stiffness Damper for Cable Vibration Mitigation

SIMULATION ANALYSIS FOR VIBRATION MITIGATION OF STAY-CABLE BY MR DAMPERS UNDER SEMI-ACTIVE CONTROL STRATEGY

Cable Vibration Control with Both Lateral and Rotational Dampers Attached at an Intermediate Location

Experimental Validation of the Design Formulas for Vibration Control of Stay Cables Using External Dampers

The negative stiffness electromagnetic tuned inerter damper for damping enhancement of stay cables