Abstract:Among fuel cells, the direct methanol fuel cell (DMFC) has attracted great attention and has been considered a very promising power source because of the ease of methanol transportation and its high energy density. A major limiting factor hindering DMFC’s commercial application is the poor catalytic performance in the anode (methanol oxidation reaction). The methanol oxidation reaction (MOR) requires (OH-) from water dissociation as an oxygen donor for the reaction; however, the slow water dissociation on Pt limits the rate of MOR. In addition to the sluggish catalytic activity, the other major impediment for Pt catalysts is the generation of carbon monoxide (CO) during the MOR process.In order to improve the catalytic performance of MOR catalysts, a variety of catalyst design strategies have been devised. The interesting way of carrying out the MOR catalytic process is the non-CO pathway which takes place on Pt-Au bimetallic catalysts, thus eliminating CO poisoning. However, the overall activity of Pt-Au alloys in MOR is relatively low, which ultimately limits the application of Pt-Au catalysts. In this study, a nanoporous (np) Au-Cu-Pt thin-film catalyst with a fine structure and tunable composition is synthesized by using a facile method involving successive electrodeposition and de-alloying. SEM, SEM-EDX and ICP have been used for morphology characterization and composition assessment. Pb under-potential deposition (UPD), H UPD and CO stripping tests have been employed to determine the electrochemical active surface area (ECSA) and to probe the Pt active sites specifically. Also, cyclic voltammetry (CV) tests have been performed to assess the catalytic performance in MOR. Finally, long-term CV and chronoamperometry (constant potential) tests have been used to study and evaluate the durability of accordingly synthesized catalyst for MOR. The prepared np Au-Cu-(8% in the precursor alloy)Pt catalyst exhibits outstanding mass and specific activity toward the MOR, which is approximately six- and nine-times higher than the activity of a commercial Pt/C(40%) counterpart, respectively. A negative 75 mV onset potential shift upon the MOR anodic scan on the np Au-Cu-(8 %)Pt catalyst in comparison with Pt/C(40%) corroborates its higher catalytic activity. Furthermore, the alloy catalyst demonstrates better durability than the Pt/C(40%) counterpart in a three-hour constant potential test and exhibits full post-factum recovery of its cycling activity. In addition, it retains more than 60% of its original activity after 3000 cycles of an accelerated degradation test. Reference: Xie, Y., Li, C., Razek, S.A., Fang, J. and Dimitrov, N., 2020. Synthesis of Nanoporous Au− Cu− Pt Alloy as a Superior Catalyst for the Methanol Oxidation Reaction. ChemElectroChem, 7(2), pp.569-580.

AuPt Nanoparticles Clusters on MWCNTs with Enhanced Electrocatalytic Activity for Methanol Oxidation

Highly active Pt–Ru nanowire network catalysts for the methanol oxidation reaction

MnO-Co@Pt nanowires encapsulated in N-doped porous carbon derived from MOFs for efficient electrocatalytic methanol oxidation reaction

Pt Nanoparticles Dispersed on Ni/C Nanoflowers As Stable Electrocatalysts for Methanol Oxidation and Oxygen Reduction

A Simple One-Step Preparation of High Utilization AuPt Nanoparticles Supported on MWCNTs for Methanol Oxidation in Alkaline Medium

Platinum Nanoparticle Clusters Immobilized on Multiwalled Carbon Nanotubes: Electrodeposition and Enhanced Electrocatalytic Activity for Methanol Oxidation

Pt1-Pd3Co1 Nanoparticles Supported on Multi-Walled Carbon Nanotubes As a High Performance Electrocatalyst for Methanol Oxidation

Preparation of Pt/multiwalled Carbon Nanotubes Modified Au Electrodes Via Pt–Cu Co-Electrodeposition/cu Stripping Protocol for High-Performance Electrocatalytic Oxidation of Methanol

Pt Nanoparticles Coated on Multiwalled Carbon Nanotubes by the Modification of Small-Sized Molybdenum Phosphide for Enhanced Methanol Electro-Oxidation

MnO2/CNT supported Pt and PtRu nanocatalysts for direct methanol fuel cells.

Au-doped PtCu 2 nanonetworks with interface-rich for enhancing methanol electro-oxidation performance

Aqueous Synthesis of Au10Pt1 Nanorods Decorated with MnO2 Nanosheets for the Enhanced Electrocatalytic Oxidation of Methanol

High-efficiency Encapsulation of Pt Nanoparticles into the Channel of Carbon Nanotubes As an Enhanced Electrocatalyst for Methanol Oxidation.

Pt Nanoclusters Anchored on Hollow Ag-Au Nanostructures for Electrochemical Oxidation of Methanol

Nanoporous Au-Cu-Pt As a Superior Electro-Catalyst for the Methanol Oxidation Reaction

Facile Synthesis of PtP2 Nanocrystals As Highly Active Electrocatalysts for Methanol Oxidation.

Highly dispersed Pt nanoparticles immobilized on 1,4-benzenediamine-modified multi-walled carbon nanotube for methanol oxidation.

Facile preparation of an excellent Pt/RuO2-MnO2/CNTs nanocatalyst for anodes of direct methanol fuel cells

Electrodeposition of Platinum Nanoparticles on Multi-Walled Carbon Nanotubes for Electrocatalytic Oxidation of Methanol

Facile Fabrication of Platinum-Cobalt Alloy Nanoparticles with Enhanced Electrocatalytic Activity for a Methanol Oxidation Reaction

Hierarchical Pt-In Nanowires for Efficient Methanol Oxidation Electrocatalysis