Abstract:The acoustic radiation from circular cylindrical shells is of fundamental and applied interest primarily because cylindrical shells are widely used in industry, and because their acoustic behaviour is different from that of beams and plates due to curvature effects. In previous studies of the subject, cylindrical shells have been categorized into acoustically thin and acoustically thick shells in terms of the ratio between the ring frequency frand the critical frequency fC, i.e., fr/fC<1 for acoustically thin shells, and fr/fC>1 for acoustically thick shells. For acoustically thin shells, it has been found by statistical methods that the radiation efficiency has a peak at the ring frequency. Above the ring frequency, the shells behave like flat plates. For acoustically thick shells, especially with finite length, however, the behavior is not so clear. From the analysis in the wavenumber domain, a formula for calculating the modal radiation efficiency of finite length circular cylindrical shells (immersed in light fluid) under mechanical excitation is obtained analytically. Based on this method, the modal-averaged sound radiation efficiencies of acoustically thick circular cylindrical shells are calculated. It is found that unlike acoustically thin shells, the radiation efficiencies of acoustically thick cylindrical shells very much depend on the acoustic behaviour of each individual vibration mode, and thus on the geometries and the boundary conditions. Results obtained by acoustic boundary element calculations and experiments verify these conclusions.

Analysis of the Input Power Flow Characteristics of Cylindrical Shells with Combination Boundaries

A Semi-Analytical Method for the Dynamic Analysis of Cylindrical Shells with Arbitrary Boundaries

Study on Influencing Factors for Sound Radiation Characteristics of Finite Length Cylindrical Shells

Study on Applicability of Modal Analysis of Thin Finite Length Cylindrical Shells Using Wave Propagation Approach

Numerical Simulation of Wind-Induced Interference Between Two Cylindrical Latticed Shells in Parallel Arrangement

Prediction and Experiment for Near-Field Sound Radiation of Cylindrical Shells

Research on the Influencing Factors of Vibro-acoustic Characteristics of Cylindrical Shells Based on Statistical Energy Analysis

Vibro-Acoustics Characteristics of Non-Uniform Ring Stiffened Cylindrical Shells Using Wave Propagation Approach

Acoustic scattering from a hemicapped cylindrical shell with substructures

Power Flow Analysis of the Coupled Cylindrical Shell with a Plate Ended

THE SOUND RADIATION EFFICIENCY OF FINITE LENGTH ACOUSTICALLY THICK CIRCULAR CYLINDRICAL SHELLS UNDER MECHANICAL EXCITATION I: THEORETICAL ANALYSIS

Vibro-acoustic analysis of laminated composite cylindrical and conical shells using meshfree method

Vibration Power Flow Analysis of a Submerged Constrained Layer Damping Cylindrical Shell

Numerical Study on the Flow-Induced Noise from Waterjet-Propelled Ship Regarding a Flexible Boundary

Effects of Joint Discontinuity on the Vibration Power Flow Propagation in A Submerged Cylindrical Shell

Wave-Based Method for Free Vibration Analysis of Orthotropic Cylindrical Shells with Arbitrary Boundary Conditions

Acoustic Radiation Torque of a Cylindrical Quasi-Gauss Beam on a Viscoelastic Cylindrical Shell Near an Impedance Boundary

Stability Analysis and Design of Time-Domain Acoustic Impedance Boundary Conditions for Lined Duct with Mean Flow

Vibroacoustic analysis of submerged fluid-filled cylindrical shell

On the frequency and dynamic analyses of complex cylindrical shells submerged in fluid: An axisymmetric FEM/BEM method

Wave Based Method for Free and Forced Vibration Analysis of Cylindrical Shells With Discontinuity in Thickness