Abstract:Nitrogen-based compounds, especially ammonia, is a promising alternative for the storage and transport of renewable hydrogen over long distances [1]. Considering ammonia as a hydrogen carrier will require studying the conversion (ammonia to hydrogen) and reconversion steps (hydrogen to ammonia). The reconversion of ammonia can take place through electrolysis under alkaline conditions [2] and needs the development of more efficient catalysts. For this, we started studying the electro-oxidation of ammonia in an anion exchange membrane electrolyser over platinum-based and PGM free electrodes with KOH as electrolyte. We have prepared several catalysts, carbon supported platinum, platinum-iridium, and nickel nanoparticles using the polyol technique. Commercial carbon supported platinum nanoparticles was used as catalyst for the cathodes. Catalyst coated substrates (CCS) were then prepared by spraying a catalytic ink over stainless-steel fiber paper for the anode side. The formulation of the ink requires optimizing parameters such as the type of ionomer (nafion, sustanion) and the ratio of ionomer to carbon. Anodes obtained have been assembled with anion exchange membranes and commercial cathodes for ammonia electro-oxidation in single cell. We have compared the performance of these different membrane electrodes assemblies (MEAs) to commercially available ones integrating nickel-iron-cobalt based anodes. The performance of MEAs was analyzed based on polarization curves, cyclic voltammograms and impedance spectroscopy data. Different testing conditions were investigated by varying the ammonia concentration from 0.1 to 1 M, the temperature from 25 °C to 60°C, and the KOH concentration from 0.1 to 5 M. References: [1] N. Morlanés et al. , “A technological roadmap to the ammonia energy economy: Current state and missing technologies,” Chem. Eng. J. , vol. 408, 2021, doi: 10.1016/j.cej.2020.127310. [2] N. M. Adli, H. Zhang, S. Mukherjee, and G. Wu, “Review—Ammonia Oxidation Electrocatalysis for Hydrogen Generation and Fuel Cells,” Journal of the Electrochemical Society , vol. 165, no. 15. pp. J3130–J3147, 2018, doi: 10.1149/2.0191815jes.

Electrochemical Ammonia Synthesis And Ammonia Fuel Cells

Accelerating the development of electrocatalysts for electrochemical nitrogen fixation through theoretical and computational approaches

Renewable Energy: Electrochemical Ammonia Synthesis and Ammonia Fuel Cells (adv. Mater. 31/2019)

Recent progress in electrochemical synthesis of carbon-free hydrogen carrier ammonia and ammonia fuel cells: A review

Ammonia as a green energy carrier: Electrochemical synthesis and direct ammonia fuel cell - a comprehensive review

Towards sustainable electrochemical ammonia synthesis

Green Chemistry: Advanced Electrocatalysts and System Design for Ammonia Oxidation

Recent Advances and Perspective on Electrochemical Ammonia Synthesis under Ambient Conditions

Comprehensive Insight and Advancements in Material Design for Electrocatalytic Ammonia Production Technologies: An Alternative Clean Energy

Ambient Electro-Synthesis of Ammonia - Electrode Porosity and Composition Engineering

Ambient Electrosynthesis of Ammonia: Electrode Porosity and Composition Engineering

Recent progress and prospects in electroreduction of nitrogen to ammonia in non-aqueous electrolytes

Electrochemical Nitrate Reduction: Ammonia Synthesis and the Beyond

Recent Advances and Challenges of Nitrogen/nitrate Electro Catalytic Reduction to Ammonia Synthesis

A technological roadmap to the ammonia energy economy: Current state and missing technologies

Ammonia as a Potential Energy Vector in the Burgeoning Hydrogen Economy

Advances in power generation from ammonia via electrocatalytic oxidation in direct ammonia fuel cells

Research progress in green synthesis of ammonia as hydrogen-storage carrier under ‘hydrogen 2.0 economy’

Hydrogen Reconversion from Ammonia through Anion Exchange Membrane Electrolysis

Recent progress and prospects of electrolytes for electrocatalytic nitrogen reduction toward ammonia

Recent Advances of Ammonia Synthesis under Ambient Conditions over Metal-Organic Framework based Electrocatalysts