Abstract:Polyesters based on 2,5-furandicarboxylic acid (2,5-FDCA) have attracted attention from both academia and industry as a new class of biobased polymers for the growing era of plastics. 2,5-FDCA-based polyesters are 100% renewable, and they are an alternative to petroleum-based or terephthalic acid (TPA)-based polyesters. Moreover, scientists and plastics experts have recognized bioplastics as an eco-friendly solution to developing cost-effective renewable plastics. The growth of the bioplastics market depends on a sustainable economy, population growth, and rapid changes in different polymers. Although a variety of auxiliaries have been practically used in recent years, the production of bioplastics from 2,5-FDCA monomers by oxidation of 5-hydroxymethylfurfural (HMF) is a relatively innovative field of research. This review focuses on the properties and applications of 2,5-FDCA-based polyesters in the packaging and coating industries for producing biobased postconsumer products. The manufacturability, excellent (thermal, mechanical, and barrier) features, and applications in various fields of available 2,5-FDCA-based homo- and copolyesters are discussed. Biobased 2,5-FDCA pure homo- and copolyesters have recently progressed with exceptional properties for their counterparts petroleum-based polyesters. In particular, the mechanical performance of 2,5-FDCA-based pure homopolyesters such as poly(ethylene 2,5-furandicarboxylate) (PEF) and poly(propylene 2,5-furandicarboxylate) (PPF) has the highest tensile strength (σ b) values of 84.07 ± 4.43 and 90 ± 6 MPa, respectively, compared with other homopolyesters. On the other hand, 2,5-FDCA-based neat copolyesters like poly(ethylene 2,5-thiophenedicarboxylate) (PETF) and poly(ethylene-co-1,4-cyclohexanedimethylene 2,5-furandicarboxylate) (PECF) had maximum tensile strength (σ b) values of 97–98 and 59–75 MPa, respectively, compared to other copolyesters. In addition, we also compared and observed the highest Young’s modulus (E) values of pure PEF (5248 ± 328 MPa) and pure PPF (2460 ± 280 MPa) homopolyesters and of neat PETF (3100–3300 MPa) and neat PECF (1740–2300 MPa) copolyesters. Furthermore, the elongation at break (ε b) values of pure poly(decylene furandicarboxylate) (PDF) (986 ± 82%) and pure poly(butylene 2,5-furandicarboxylate) (PBF) (368 ± 43%) homopolyesters and neat poly(pentylene furandicarboxylate) (PPeF) (1050 ± 200%) and neat poly(1,4-butanediol 2,5-thiophenedicarboxylate) (PBTF) (900 ± 84%) copolyesters had the highest values compared to other pure homo- and copolyesters. Finally, the results of the barrier improvement factor (BIFp) study showed that neat PPeF copolyesters had the highest values of O2 (227 BIFp) and CO2 (979 BIFp) compared to other pure homo- and copolyesters.

Partial Bio-Based Poly (aryl Ether Ketone) Derived from 2,5-Furandicarboxylic Acid with Enhanced Processability

Biobased poly(butylene 2,5-furandicarboxylate) and poly(butylene adipate-co-butylene 2,5-furandicarboxylate)s: From synthesis using highly purified 2,5-furandicarboxylic acid to thermo-mechanical properties

A bio-based N-heterocyclic poly(aryl ether ketone) with a high biomass content and superior properties prepared from two derivatives of guaiacol and 2,5-furandicarboxylic acid

Synthesis and characterization of bio-based furanic polyesters

Synchronously Chemically Closed-loop and High-Performance Approach for Furan-based Copolyester with Robustness, High Gas Barrier, High Puncture Resistance

Poly(1,4-butylene -co-1,4-cyclohexanedimethylene 2,5-furandicarboxylate) copolyester: Potential bio-based engineering plastic

Preparation and performance exploration of 2,5‐furandicarboxylic acid‐based copolyester bioplastics: Controlling thermal properties, tensile properties, and surface hydrophilicity through composition

An Eco-Friendly Method to Get a Bio-Based Dicarboxylic Acid Monomer 2,5-Furandicarboxylic Acid and Its Application in the Synthesis of Poly(hexylene 2,5-furandicarboxylate) (PHF)

A Series of Furan‐aromatic Polyesters Synthesized Via Direct Esterification Method Based on Renewable Resources

Recent Progress on Bio-Based Polyesters Derived from 2,5-Furandicarbonxylic Acid (FDCA)

Bio-based epoxy resins derived from diphenolic acid via amidation showing enhanced performance and unexpected autocatalytic effect on curing

Recent Progress on Sustainable 2,5-Furandicarboxylate-Based Polyesters: Properties and Applications

Renewable Furan-Based Epoxy Resins Derived from 5-Hydroxymethylfurfural and Furfural

Fully Bio-based Furyl-functionalized Bisphenols and Bio-based Cross-linking Poly(aryl ether ketone)s with High Biomass Content, Thermo-reversibility, Excellent Processing and Mechanical Properties

Enzymatic synthesis of lignin derivable pyridine based polyesters for the substitution of petroleum derived plastics

Bio-resourced furan resin as a sustainable alternative to petroleum-based phenolic resin for making GFR polymer composites

Bio-based Poly(decylene Terephthalate-Co-decylene Furandicarboxylate)s Derived from 2,5-Furandicarboxylic Acid (FDCA): Synthesis and Properties

New Bio-Based Copolyesters Derived from Novel Cyclic Diol 2,5-Tetrahydrofurandimethanol, 2,5-Furardicarboxylic Acid and 1,3-Propanediol: Synthesis, Thermal Behavior and Rheological Properties

Synthesis of Furan-Based Diamine and Its Application in the Preparation of Bio-Based Polyimide

Bio-Based Polyesters with High Glass-Transition Temperatures and Gas Barrier Properties Derived from Renewable Rigid Tricyclic Diacid or Tetracyclic Anhydride

Hydrogen Bonding-Rich Bio-Benzoxazine Resin Provides High-Performance Thermosets and Ultrahigh-Performance Composites