Abstract:This article presents a novel design approach of a reconfigurable filter with switchable operating frequency, bandwidth, and response type. Boolean-like operations, including intersection and complement, of frequency responses are defined, as the basic design principle. The switchable filtering responses are discussed in detail when utilizing one-or two-channel filters with overlapping passbands. It is easy to extend the properties to the N -stage case of a reconfigurable filter. Generally, for a cascaded N -stage reconfigurable filter, one can achieve 2N(2)+ 2 filtering responses, including (3N-1) N/2 bandpass responses, (N+1)N/2 bandstop responses, along with an all-pass (AP) response and an all-stop (AS) response. As the basic building block, a switchable filter unit consists of a channel bandpass filter (BPF), a circulator, and three RF switches, whose response type can be reconfigured by adjusting the states of the switches. A single-stage switchable filter unit and a three-stage reconfigurable filter prototype are developed with microstrip structures. The reconfigurable filter prototype offers 20 different filtering responses with only three channel filters, occupying an area of 1.21x 0.69 lambda(2)(g). For the provided bandpass responses, the 12 passbands cover 1.17 similar to 1.6 GHz with selectable bandwidths of 60.6 similar to 245.4 MHz, with in-band insertion losses (ILs) of 5.1 similar to 7.9 dB. For the bandstop responses, the six suppression bandwidths are 227.6 similar to 368.1 MHz, with an in-band suppression of 16.3 similar to 22.5 dB. The IL is 3.5 dB for the AP response, and the suppression level is 63 dB for the AS response. Good agreement is obtained between the simulated and measured results to validate the proposed technique.

A High Order Switched-Capacitor Bandpass Filter with Passband Tunable and -76Db/octave Attenuation at Transition Band

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

A Charge-Domain Switched-Gm-C Band-Pass Filter Using Interleaved Semi-Passive Charge-Sharing Technique.

A Sixth-order Switchable Superconducting Balanced Filter with Wide Stopband Using Asymmetric Coupled SIRs

Synthesis Design of Wideband Bandpass Filter With High Selectivity and Harmonic Suppression

Compact Dual-Band Bandpass Filter with Improved Stopband Characteristics

Design of A Reconfigurable Filtering Switch with Sharp Rejection and Wide Stopband

Reconfigurable Filter with Switchable Operating Frequency, Bandwidth, and Response Type Using RF Switches and Circulators

A 7.5mw 35–70mhz 4Th-Order Semi-Passive Charge-Sharing Band-Pass Filter with Programmable Bandwidth and 72db Stop-Band Rejection in 65nm CMOS

Design of high selectivity tunable bandpass filter with switchable single‐/dual‐band responses

Analysis of Discrete-Time Charge-Domain Complex Bandpass Filter with Accurately Tunable Center Frequency

Synthesis Design of Equal-Ripple and Quasi-Elliptic Wideband BPFs with Independently Reconfigurable Lower Passband Edge

Reconfigurable Bandpass Filter With Multi-Band Switching and Band Shiftability

A Compact Tunable Bandpass Filter with High Selectivity and Low Insertion Loss Using Novel CRLH Cell

Design and simulation of switched capacitor filter for speed change parameter converter

High Selective Bandpass Filter with Controllable Transmission Zeros

A Switched-Capacitor RF Front End With Embedded Programmable High-Order Filtering.

High common‐mode rejection balanced bandpass filter using novel coupling scheme and source‐loaded coupling technique

Highly Selective and Controllable Superconducting Dual-Band Differential Filter with Attractive Common-Mode Rejection

Tunable Balanced Bandpass Filter with Constant Absolute Bandwidth and High Common Mode Suppression

Design and simulation of tunable bandstop filters by integrating RF MEMS shunt switch for K-band applications